User Guide
Activating the Theft-Deterrent Feature
The instructions which follow, explain how to enter
your
secret code to activate the THEFTLOCK
system.
It
is
recommended that you read through all nine steps
before starting the procedure.
NOTE:
If
you allow more than
15
seconds to elapse
between any steps, the radio automatically reverts to
time and you must start the procedure over at Step
4.
1.
Write down
any
three or four-digit number from
000
to
1999
and keep it in a safe place separate
from
the
vehicle.
2.
Turn the ignition to ACCESSORY or
RUN.
3.
Turn the radio off.
4.
Press the
1
and
4
buttons together. Hold them down
until
---
shows on the display. Next you
will
use the
secret code number which you have written down.
5.
Press
MN
and
000
will appear on the display.
6.
Press MN again to make the last two digits agree
7.
Press
HR
to make the first one or two digits agree
with
your code.
with
your code.
8.
Press AM-FM after
you
have confirmed that the
code matches the secret code you have written down.
The display will show REP to let
you
know that
you
need to repeat Steps
5
through
7
to confirm your
secret code.
9.
Press
AM-FM
and
this time the display will show
SEC
to let
you
know that your radio is secure. The
indicator by the volume control will begin flashing
when the ignition is turned
off.
Unlocking the Theft-Deterrent Feature After a
Power
Loss
Enter
your
secret code as follows; pause no more than
15
seconds between steps:
1.
LOC appears when the ignition is on.
2.
Press MN and
000
will appear on the display.
3.
Press
MN
again to make the last two digits agree
with your code.
4.
Press
HR
to make the first one or two digits agree
5.
Press AM-FM after you have confirmed that the
with
your code.
code matches the secret code you have written down.
The display will show
SEC,
indicating the radio is
now operable and secure.
3-24