User Guide
Setting
the
Tone
Playing
a Cassette
Tape
BASS:
Press lightly on this knob
to
release
it
from its
stored position. Turn the knob clockwise
to
increase
the
bass
and counterclockwise
to
decrease the bass. When
the
BASS control
is
rotated, the AUTO
TONE
setting
will change to
MAN.
Push
the
knob back
in
to
its
stored
position when done.
TREB:
Press lightly
on
the
TREB
knob
to
release
it
from its stored position. Turn the knob clockwise to
increase the treble and counterclockwise to decrease
the treble. When the
TREB
control
is
rotated, the
AUTO
TONE
setting will change
to
MAN.
Push the
knob back
in
to
its
stored position when done.
Adjusting
the Speakers
BAL:
Press
this
button
to
remove
the
control from its
stored position. Turn the control clockwise to adjust
sound to the right speakers and counterclockwise to
adjust sound
to
the
left speakers. Press the button again
to
return BAL to its stored position.
FADE:
Press this button to remove the control from
its
stored position. Turn the control clockwise
to
adjust
the
sound
to
the front and counterclockwise for rear
speakers. Press the button again to return
FADE
to
its
stored position.
Your
tape player
is
built
to
work best
with
tapes
that
are
30
to
45
minutes long
on
each side. Tapes longer than
that are
so
thin
they may not work well
in
this player.
To
load
a
cassette tape with the ignition off. press
EJECT
or
RECALL.
Then, insert the cassette tape.
If
the
ignition
is
on
but the radio
is
off,
the tape will
begin playing.
The player automatically senses
if
the cassette tape
is
metal or CI-02 and adjusts for best playback sound.
For
metal tapes, the double-D symbol
will
appear
on
the
display.
Once
the
tape
is
playing. use the VOL,
BAL,
FADE,
TREB
and
BASS
controls just
as
you do for the radio.
The tape symbol and
a
direction arrow will be on the
display whenever
a
tape is being played. Anytime
a
tape
is
inserted. the top side
is
selected for play
first.
PREV
(1):
Press the
PREV
or the
SEEK
left arrow
to
search for the previous selection.
A
minitnurn
three-second blank pap
is
required
for
the player
to
stop
at the beginning
of
the selection.
The
tape direction
arrow will blink during the
SEEK
operation.
PROG
(2):
Press
this
button
to
switch frotn one side
of
the
tape
to
the other.
3-13