User Guide
NEXT
(3):
Press NEXT or the SEEK right arrow to
search for the next selection.
A
minimum three-second
blank gap
is
required for the player
to
stop at
the
beginning
of
the selection. The tape direction arrow
will blink during the
SEEK
operation.
REV
(4):
Press this button to rapidly reverse the tape
to
the beginning of the cassette reel or
until
you press REV
again. The radio will play the last selected station while
reversing the tape.
The
tape direction arrow will blink
during REV operation.
(5):
Press this button'to reduce cassette tape noise.
The double-D symbol will appear
on
the
display while
the player
is
in
this
mode.
Dolby
Noise
Reduction
is
manufactured under a license
from Dolby Laboratories Licensing Corporation. Dolby
and the double-D symbol
are
trademarks
of
Dolby
Laboratories Licensing Corporation.
FWD
(6):
Press this button
to
rapidly forward the tape
to the end of the cassette reel or
until
you
press FWD
again.
The
radio will play the last selected station while
forwarding the tape. The tape direction arrow will blink
during
FWD
operation.
AM-FM:
Press this button to switch from a tape to
the radio.
TAPE
AUX:
Press
this
button
to
return to
the
tape
player. The lighted arrow will appear and show the
direction of play when a tape
is
in
the active mode.
EJECT
Press this button
to
remove the tape. The radio
will now play. EJECT can be used with either the ignition
or radio
off.
To load a cassette tape with the ignition or
radio off, press
EJECT
before loading the cassette.
t
CLN:
This message may appear
on
the
display.
If
it
does, your cassette tape player needs
to
be cleaned.
It
will
still play tapes, but you should clean
it
as soon as
possible
to
prevent damage
to
your tapes and player. See
"Care of
Your
Cassette Tape Player"
in
the 1nde.x.
After
you
clean the player? press and hold
EJECT
for five
seconds
to
reset the
CLN
indicator. The radio will
display
---
to show the indicator was reset.
3-14