User Guide
Truck-Camper
Loading
Information
This label is inside your glove
box.
It
will tell you
if
your
vehicle
can carry
a
slide-in camper, how much
of
a
load your vehicle can carry, and how to correctly spread
out your load.
Also,
it will help you match the right
slide-in camper to your vehicle.
When you carry a slide-in camper,
the
total cargo load
of your vehicle is
the
weight
of
the camper, PLUS
0
everything else added to the camper after
it
left
the factory;
everything
in
the camper; and
0
all
the people inside.
The Cargo Weight Rating (CWR) is
the
maximum
weight
of
the load your vehicle can carry.
It
doesn’t
include the weight
of
the
people inside. But, you can
figure about
1-50
Ibs.
(68
kg) for each seat.
The total cargo load must
not
be more than your
vehicle’s CWR.
Refer to the Truck Camper Loading Information label
in
glove box for
A
and
B
dimensions.
Use the
rear
edge
of
the
load
floor for measurement
purposes.
The recommended location for the cargo center of gravity
for the Cargo Weight Rating (CWR)
is
the point where
the mass of a body is concentrated and,
if
suspended at
that point, would balance the front and rear.
4-44