User Guide

Follow these instructions to lower the spare tire:
1.
2.
3.
A. Hoist Assembly
B. Ratchet
C. Jack Handle
D. Hoist Shaft
E. Valve Stem,
Pointed Down
E Spare Tire
Ci. Retainer
H. Hoist Cable
4.
One side of the ratchet has an IJP marking. The
other side has a
DOWN marking. Assenlble the
ratchet
to the hook near the end of the jack handle
(as illustrated) with the DOWN marking facing you.
Insert the other end through the hole in the rear
bumper and into the hoist shaft.
Turn the ratchet to lower the spare tire
to the ground.
Continue to
turn the ratchet until the spare tire can be
plrlled out from under the vehicle.
When the tire has been lowered.
tilt the retainer at
the end
of the cable so it can be pulled up through
the wheel opening.
Put the spare tire near the flat tire.