User Guide

Checking Brake 1
You can check the brake fluid without taking off the cap.
Just look at
the window on the brake fluid reservoir. The
fluid level should be above MIN. If it isn't, have your
brake system checked to see if there is a leak.
After work
is done on the brake hydraulic system,
make sure the level is above
MIN and below the top
of the window.
What to 1
When you do need brake fluid, use only DOT-3
brake fluid -- such as Delco Supreme 11 @ (GM Part
No. 1052535). Use new brake fluid from a sealed
container
only, and always clean the brake fluid
reservoir cap before removing
it.
I
I
I A CAUTION: I
With the wrong kind of fluid in your brake
system, your brakes may not work well, or they
may not even work at
all. This could cause a
crash. Always use the proper brake fluid.
6-34