User Guide

4. Push in gently on
the bulb, turn it
counterclockwise
c
. ..
and remove it from
the socket .
5. Put in a new bulb and, pushing in gently, turn it
clockwise
until it is tight.
6. Put the socket back in the latnp assembly and replace
the lens and lens seal.
indshield Wiper Blade l.Lpldcement
For proper type and length, see "Normal Maintenance
Replacement Parts"
in the Index. To replace the
windshield wiper blade assembly:
1
1. Lift the wiper arm and rotate the blade until it is
facing away
from the windshield.
2. Push the release lever and slide the wipcr asselnbly
toward the driver's side
of the vehicle.
3. Install a new blade by reversing Steps I and 2.