User Guide

Winds1 . :Id Wipers
You control the windshield
wipers by turning the knob
with the wiper symbol on it.
For a single wiping cycle, turn the knob to MIST. Hold
it there until the wipers start, then let go. The wipers will
stop after one cycle.
If you want more cycles, hold the
knob on
MIST longer.
You can set the wiper speed for a long or short delay
between wipes.
This can be very useful in light rain or
snow. Turn the knob to choose the delay time. The
closer to LOW, the shorter the delay.
For steady wiping at
low speed, turn the knob to the
LOW position. For high-speed wiping, turn the knob
further,
to HIGH. To stop the wipers. move the knob to
the OFF position.
Be sure
to clear ice and snow from the wiper blades
before using them.
If they are frozen to the windshield,
carefully loosen or thaw them.
If your blades do become
damaged, get new blades or blade inserts.
Windshield Washer
At the top of the lever,
there’s a paddle with
the word
PUSH on it.
To spray washer tluid
on the windshield, push
Washer fluid will spray as long as you push the paddle.
When you
let go of the paddle, the wipers will continue
to wipe for a few seconds and then either stop or return
to the preset speed.
2-35