User Guide

Resuming a Set Speed
Setting Cruise Control
A CAUT’3N:
If you leave your cruise control switch on when
you’re not using cruise, you might hit
a button
and
go into cruise when you don’t want to. You
could be startled and even lose control. Keep the
cruise control switch
OFF until you want to use it
1. Move the cruise switch to ON.
2. Get up to the speed you want.
3. Press in the SET button
at the end
of the lever
and release it.
4. Take your foot off the accelerator pedal
Suppose you set your cruise control
at a desired speed
and then you apply the brake. This, of course, shuts off
the cruise control. But you don’t need to reset it.
Once you’re going about
25 mph (40 kndh) or nwre,
you can move the cruise
switch from
ON to R/A
(Resull7e/Accelerate)
for
about a I /2 second.
You’ll go right back up to your chosen speed and
stay there.
Remember,
if you hold the switch at R/A longer than
a
1/2 second, the vehicle will keep going faster until
you release the switch or apply the brake. You could be
startled and e\len lose control.
So unless you want to go
faster, don’t hold the switch at R/A.
2-37