GD9520 MARINE STEREO SYSTEM AND DVD PLAYER GR9520W • GR9520B INSTRUCTION MANUAL
CONTENTS Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 General Functions. . . . . . . . . . . . . . . . . . . . . . . 6 ACCESSORIES SUPPLIED. . . . . . . . . . . . . . . . . . . . . 2 Radio Operation. . . . . . . . . . . . . . . . . . . . . . . . 6 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 CD/MP3/dvd operation. . . . . . . . . . . . . . . . . . 7 Product Description and Model Designators . . . 3 AUXILIARY INPUTS & OUTPUTS. . . . . . . . . . . .
Read this instruction booklet carefully, drop in your favourite DVD or music selection, sit back and enjoy the performance. Introduction Congratulations on the purchase of the GME GD9520 Marine Stereo and Digital Video Disc system. Your GD9520 has been designed using the latest digital AV technology combined with GME’s 35 years of marine product development.
Moisture Condensation INSTALLATION INSTALLATION PRECAUTIONS If you are connecting your GD9520 for the first time or have just reconnected your boat battery and you are experiencing problems with the unit’s operation, we suggest you try resetting the unit. The reset button is located under the removable face panel (see below for instructions). Gently press the reset button with a paper clip or similar object. You can then refit the face panel.
2. Fit replacement fill strips as supplied into top and bottom frame edges. Screw Caps Fill Strips 3. Mount your unit into the bulkhead. Use supplied spare screw caps to cover screw heads. Electrical Wiring DC Connections Caution: The GD9520 is designed for vessels with a 12 Volt negative ground electrical system only! Important: Your GD9520 is able to maintain it’s memories when it is switched off using the PWR button by drawing power directly from your battery via the Yellow ‘MEMORY 12 V+’ lead.
Connect all four speakers as shown in the previous diagram. Adjust the Fader control for the required front/rear balance. If you wish to connect only two speakers, connect these to the Rear speaker wires. The remaining speaker wires should be insulated to ensure they cannot short circuit together or to the vessel’s 12 Volt or negative electrical Bus. If using only two speakers, adjust the Fader control to the rear speakers.
FM3), sequentially press the BND button until the required band is selected. 11 Tuning/Selecting Tracks/Chapters tracks with no audio level, otherwise a sudden change to very loud music could damage your speakers. Inserting the CD/DVD Manual Tuning To tune the radio manually, momentarily press the or button to select the desired frequency. Each press will step the frequency by 50 kHz. Automatic Tuning (Seek) or buttons for 3 seconds.
11 Subtitles (DVD Mode only) Pause To pause playing the CD/DVD, press the button once. The disc symbol on the LCD will stop rotating when the pause function has been selected. Press the SUBTITLE button on the remote control to display subtitles. Press the Repeat Play To enter the SET UP mode, Press the STOP button, then press the SET UP button on the remote control. To continually play the current track or chapter, press the RPT button (Numeric button #3 on the front panel).
• Use CD-Rs with a speed of 1x to 8x and write with a speed of 1x to 2x. • Do not play CD-RWs that have been written to more that 5 times. Note: If a disc contains audio CD data and MP3 files, the GD9520 will only play which ever is first on the disc. If the first track on the disc is an MP3 file, the unit will only play the MP3 files from the disc, and will ignore all other files and vice versa.
Battery Replacement Should the working range of remote control handset reduce, or functions fail to operate correctly. The battery should be replaced: 1. Turn remote over, Insert thumb nail between grooves on the battery cover latch and slide to the right, pull out the battery tray. 2. Replace the battery, (type CR 2025 or equivalent), with the positive side facing upwards. 3. Slide the battery tray back into the handset.
GR9520 Trouble Shooting Guide Symptom C ause Solution Vessel’s battery switch is not on. Check master switch if fitted. One of the fuses is blown. Replace the damaged fuse with the correct value. Error messages displayed on LCD or functions not operating. Microprocessor lock up. Press Reset Button. Poor radio reception. Damaged or incorrect type of antenna. Check antenna and replace if necessary. CD/DVD cannot be loaded. There is already a CD in the player. Remove disc, then insert new disc.
WARRANTY GME AFTER SALES SERVICE GME limit this warranty to the original purchaser of the equipment. GME warrant this product to be free from defects in material and workmanship for a period of twelve (12) months from the date of purchase from their authorised retailer. Should the product require servicing during this period, all labour and parts used to effect repairs will be supplied free of charge.
