MARINE SPEAKERS GS500 Instruction manual
Introduction Congratulations on your purchase of the GME Marine Speakers. MOUNTING 1. When mounting the speakers in the kick panel, make sure there is a clearance of 55 mm (2.17”) behind the well. These speakers are designed to the highest level of quality and will offer you years of listening enjoyment.
2. Remove the speaker grille (turn anti-clockwise). Fit the speaker into the cutout and secure the speaker using the screws (supplied). Replace the speaker grille on the speaker (turn clockwise) until the grille locks into place. Speaker specifications System Coaxial woofer/tweeter Power (watts) 110 Tweeter Neo PEI Dome Efficiency (1W/1M) 88 dB Frequency Response 80 Hz - 20 kHz Impedance (Ohms) 4 Weight - kgs, (lbs) 0.78 (1.72) Speaker depth - mm (inches) 55 (2.
Standard communications WARRANTY AGAINST DEFECTS 1. Consumer guarantees 1.1 Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. 1.
Ou te r fg eo g ed er ak e Sp rill e hol 163 mm diameter 122 mm diameter 3.3 mm drill bit 6.
