MARINE SPEAKERS GS650 Instruction manual
Introduction Congratulations on your purchase of the GME Marine Speakers. These speakers are designed to the highest level of quality and will offer you years of listening enjoyment. MOUNTING 1. When mounting the speakers in the kick panel, make sure there is a clearance of 65 mm (2.56”) behind the well. Thank you for making GME your choice for marine audio equipment.
2. Remove the speaker grille (turn anti-clockwise). Fit the speaker into the cutout and secure the speaker using the screws (supplied). Replace the speaker grille on the speaker (turn clockwise) until the grille locks into place. Speaker specifications System Coaxial woofer/tweeter Power (watts) 140 Tweeter 20 mm Neo Teteron dome Efficiency (1W/1M) 91 dB Frequency Response 80 Hz - 20 kHz Impedance (Ohms) 4 Weight - kgs, (lbs) 1.02 (2.25) Speaker depth - mm (inches) 65 (2.
Standard communications WARRANTY AGAINST DEFECTS This warranty against defects is given by Standard Communications Pty Ltd ACN 000 346 814 (We, us, our or GME). Our contact details are set out in clause 2.7. This warranty statement only applies to products purchased in Australia. Please contact your local GME distributor for products sold outside of Australia. Local distributor details at www.gme.net. au/export. 2.
O u te ri r edge of g ll mm 6. 8 3.
