Manual

TX 650 IN STRUCTI ON MANUA L PAGE 9

MENU FUNCTIONS

Display Functions Settings

‘Flashing’ Change Channel 01 - 40

CTC Change Privacy Code 01 - 38, oF

Po Set TX Power Lo, HI

dh Select Dual Watch Mode 01 - 40, oF

Uo Select Hands Free (VOX) Lo, HI, oF

rb Activate Rodger Beep on / oF

bP Activate Key Beep on / oF

bb Activate Room Monitor on / oF

CA Change Call Tone 01 - 03

VOLUME LEVEL

There are 7 volume levels to suit your personal preference. To adjust the volume

level, press the

or button. ‘UL’ with be displayed along with a volume level

setting between 1 and 7. A beep tone will also indicate an increase or decrease

in volume.

Note: The volume level cannot be adjusted when Scan or Dual Watch modes

are selected.

ANNELS

This radio communicates on 38 of the available 40 UHF CB channels (channels 22

and 23 are reserved for telemetry use and are disabled for voice transmissions).

To communicate with other UHF CB radios, all units must be switched to the

same channel.

To change the radio channel

Press the MOD

E button. The channel number will ﬂash. Use the or buttons

to select the desired channel. Press the PTT button or wait for 5 seconds to store

your choice.