Installation Instructions

Installation instructionsYepp Mini Ahead adapter
1
Installation instructionsYepp Mini Ahead adapter
The Yepp Mini Ahead adapter is suitable for mounting a Yepp Mini on bicycles with a Ahead system
for the handlebar. It fits on regular front forks with a diameter of 11/8 inch. These instructions only
describes how to Mount the Ahead adapter on the bicycle. For mounting the Yepp Mini and for
instructions for use and safety advices please refer to the installation instructions provided with the
Yepp Mini together with the manual supplied by the bicycle manufacturer.
Installation
The Yepp Ahead adapter is supplied pre assembled. To mount the adapter on your bicycle you have
to remove the handlebar First. Please follow the description below, however the fixation of your
handle bar can be different, please check the manual of your bicycle or contact your bicycle dealer.
1. Remove the handlebar by loosening the 2 hexagon screws at the side of the Ahead system.
(pic.1). Remove the hexagon screw on top (pic.2) , now you can take of the handlebar
2. Position the Ahead adapter over the stem (pic.3) and reinstall the handlebar. If the length of
the stem is not sufficient, you can remove one of the spacers. Make sure that you install
the handlebar correctly and make sure that that cables are not twisted. Tighten the hexagon
screws firmly, check the manual of the bicycle for the right tightening force.
3. To prevent the Ahead adapter from turning you always have to mount the U-shape
bracket.(pic.4) You can chose one of the 2 available positions, depending on the shape of
your system. Use the washers and tighten the nyloc bolts firmly (4Nm). For extra protection
you can mount the acorn nuts.
4. Assemble the Yepp Mini according to the provided instructions.
Instructions for use:
Make a short test ride, without child, to check if everything is mounted correctly and the
seat does not obstruct the cycling.
If you have any doubts regarding the assembly of this product on your bicycle we
recommend you obtain further information from your bicycle retailer.
Warnings and safety advices:
WARNING ! Never modify the Ahead adapter yourself. This will invalidate the guarantee
and any claims for liability.
WARNING ! Note that cycling with a child seat can affect the way the cycle behaves,
especially when moving off and going round corners. Use the Yepp Mini with Ahead adapter
only on bicycles suitable to carry the extra load. Check the manual of the bicycle or contact
the bicycle’s manufacturer.
Check after assembling if all Parts are mounted correctly and all fasteners are sufficiently
tight.
WARNING ! The Yepp Mini Ahead adapter is designed for normal daily use; not for
extreme circumstances such as off-road or on ATB courses.
Check regularly if all fasteners are sufficiently tight.
Check if it legal to mount a child seat on the front of your bicycle in the country you wish to
use it.
Guarantee:
GMG guarantees that this product has been manufactured according to the latest European safety
standards and quality requirements for this product and that this product at the time of purchasing
has no defect in workmanship and material. During production various quality checks have been
performed. In case, despite all our efforts, during our guarantee period of 24 months, this product
shows a material and/or manufacturing fault (with normal use as described in this manual), than GMG