User Manual

38 39
TROUBLESHOOTING GUIDE
SYMPTOM CAUSE POSSIBLE REMEDY
The Bluetooth pairing failed The Phone Clip+ left Blue-
tooth pairing mode before
mobile phone completed the
pairing session
The wrong 4-digit PIN code
has been entered
Repeat the Bluetooth pairing process, and assure that the
process is completed within 120 seconds after having been
activated in the Phone Clip+
Repeat the Bluetooth pairing process and if a PIN code is
requested, enter 0000 (four zeros)
The mobile phone is ringing
but the light indicator on the
Phone Clip+ does not flash,
and no ringing tones will
sound in the hearing instru-
ments
The Phone Clip+ is powered
off
The Phone Clip+ and mobile
phone have not been paired
The Bluetooth connection
between the Phone Clip+
and the mobile phone is lost
Power on the Phone Clip+
Perform the Bluetooth pairing process and make a Bluetooth
connection between the Phone Clip+ and the mobile phone
Assure that Bluetooth is enabled in the mobile phone and
make a Bluetooth connection between the Phone Clip+ and
the mobile phone again, e.g. by pressing the multifunction
button briefly on the Phone Clip+.
As for any details of the Bluetooth operation of the mobile
phone, please refer to its user guide