User's Manual

29
so that the shaft of the tool is touching the rim of the wax guard. Slowly pull the wax guard straight out.
2. To insert the new wax guard, gently press the replacement side of the wax guard tool straight into the
hole of the sound outlet until the outer ring lies flush with the outside of the receiver. Pull the tool straight
out -the new wax guard will remain in place.
i
Tip: Pressing on the new filter with the flat side of the wax filter tool can ensure that the filter is correctly
in place.
i
Note: If a different type of wax filter is used for your hearing instruments, or if your hearing instruments
do not use wax filters, consult your hearing care professional for guidance.
i Use only original ReSound consumables e.g. wax filters.
i General precautions
1. When wireless function is activated, the device uses low-powered digitally coded transmissions in
order to communicate with other wireless devices. Although unlikely, nearby electronic devices may be
affected. In that case, move the hearing instrument away from the affected electronic device.
2. When using wireless functionality and the devices are affected by electromagnetic interference, move
away from the source.
3. Only connect ReSound hearing instruments to ReSound accessories intended and qualified to be used
with ReSound hearing instruments.
4. Never attempt to modify the shape of the hearing instrument, ear-moulds, or tubing yourself.
5. For use of wireless functionality only use ReSound Unite accessories. For further guidance please refer
to the user guide of the relevant ReSound Unite accessory.
400332000-GB-14.10-Rev.A.indd 29 19-11-2014 12:48:33