User Manual

1
Welcome
Congratulations on your Airlink 2 which will allow you to connect and fit wireless hearing instruments,
without the use of an intermediate device, using easy plug and play functionality. Carefully read this user
guide to fully benefit from the Airlink 2.
Ask your local hearing instrument manufacturer if you have any questions.
Do not attempt to use Airlink 2 together with any other fitting software unless explicitly instructed.
Airlink 2 can co-exist with other hearing instrument programming interfaces (e.g. Speedlink, Hi-PRO,
NOAHlink) on the same PC.
For your safety, carefully read the chapter Important Information.
Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment gene-
rates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense. Changes or modifications can void the user’s authority to operate the
equipment.
FCC ID: X26FD-2
Intended use
Airlink 2 is intended to enable a fitter to wirelessly adjust settings of wireless hearing instruments. The
primary function of Airlink 2 is to transfer signals from a PC used for fitting to a ReSound, Beltone or
Interton wireless hearing instrument without causing errors in programming or unintended loud noise in
the ear of hearing instrument user in case of unintended disconnection.
List of countries
Products are intended for sale in countries within European Economic Area as well as Switzerland.
National restrictions
Norway: You are not allowed to operate the equipment within 20 km of the centre of Ny Ålesund. The
product is in compliance with the following regulatory standards: