User's Guide
Table Of Contents
- Introduction
- Your hearing aid
- How to get your hearing aid ready for use
- How to place the hearing aids in your ears
- How to remove the hearing aids from your ears
- How to use your hearing aids
- Direct Audio Input (optional)
- Advanced options
- How to clean and maintain your hearing aids
- Wireless accessories
- Tinnitus Management
- General warnings
- Troubleshooting
- Warnings to hearing care professionals (US only)
- Regulatory information
- Hearing aid variants
- Technical specifications
- Additional information
When boarding a flight or entering an area where RF transmitters are prohibited, wireless
functionality must be deactivated.
Follow these steps to turn off wireless mode:
1. For each hearing aid, open and close (open-close, open-close, open-close) the battery door
three times within a 10-second period.
2. Double-dings for ten seconds ( etc.) indicate that your hearing aid is in Flight mode.
Follow these steps to activate wireless mode:
1. For each hearing aid, open and close the battery door once.
2. Your hearing aids are in wireless mode after 10 seconds.
NOTE: Both hearing aids must be set in Flight mode - even with synchronisation enabled.
It is important to wait an additional 15 seconds after wireless function resumes before opening
and closing the battery compartment again for any reason. Flight mode will resume if you open
and close the battery compartment during this 15 second window.
How to use your hearing aids with iPhone, iPad and iPod touch (optional)
Your hearing aids are Made for iPhone, iPad and iPod touch, which allow for direct audio streaming
and control from these devices.
29