Technical Manual

VoIP client / softphone support Implementing the newly developed GN USB
standard the device will be compliant to the
Microsoft Unified Communications (UC)
standard. A variety of VoIP clients and/or
softphones using the current GN USB HID
commands (8120, 9300 series) will also
provide basic headset supported without
additional customization. The product is fully
compliant with GN’s PC software
developments and SDKs (Hector).
Other key functionality:
Auto pairing
• Device enters into auto pairing mode on 1
st
time use / connection
Multiple pairing
• Possible to be paired with 6 devices at the
same time
• Depending on firmware version to support
mono and mono / stereo (in the mix via
HS, HF, A2DP and AVRCP profile).
Table 1 - Key features
1.3 Features & Characteristics requirements
This section is based on the marketing product definition sheet. Details of how functions
shall operate must be presented in chapter 3. .
For details please refer to chapter 3 (functional requirements) and 4 (operational
requirements).
Functional
Physical
Characteristics
Connector USB xy
Size App. 70mm (L) x 18mm (W) x 8mm (H)
Weight <10 g
Mechanical
features
Button key Pairing button
Surface treatment No paint applied
Materials – general
characteristics
Mid-range quality feel
MMI features
Controls -
buttons, etc.
Pairing button Large, centered, tactile feeling, supporting
only pairing
Indicators - LEDs,
display, etc.
On, pairing,
connected
a.) 1xBlue LED
b.) 1xBlue LED
Connectors
USB connector x-pin […]