User's Manual

Turning your headset on and off
•
Press the headset Answer/End button  to turn your headset on. The LED will emit 3
fast blue flashes. If you are wearing the headset, you will hear a series of rising beeps.
•
Press and hold the headset Answer/End button to turn your headset off. The LED
will emit 3 fast blue flashes. If you are wearing the headset, you will hear 2 beeps
followed by a series of fading beeps.
IMPORTANT: If you are on an active call, transfer the call to your handset before you
turn your headset off.
Adjusting the volume
The Jabra JX10 automatic volume control elevates sound level and quality to match your
environment. If necessary, use the volume button
 on your headset up (+) or down (-)
to adjust
.
4 For use with desk phone
This setup will work for most desk phones (not cordless phones).
If your desk phone has a headset port or electronic hookswitch, or you are using a
GN1000 (remote handset lifter), you can follow this setup. However, if you wish to access
all the features of the Jabra JX10 with Bluetooth Hub, please turn to the relevant chapter
for setup and use instructions.
Jabra Bluetooth Hub setup
Connecting your Jabra Bluetooth Hub with desk phone and power supply
•
Disconnect the handset from your desk phone (by unplugging the handset from the
socket on the desk phone).
•
Connect the handset to your Bluetooth Hub’s handset socket .
•
Connect the desk phone socket port to the desk phone socket  on the Bluetooth
Hub using the supplied connection cord (desk phone-to-Bluetooth Hub
).
•
Connect the power supply to your Bluetooth Hub’s power supply socket .
•
Connect the power supply to the wall power socket.
The green LED
 indicates that the Bluetooth Hub power is on.
10
English