User's Manual

Remember!
In general, you will get better performance when there are no obstructions between
your headset and your Bluetooth Hub.
* up to 33 feet/10 meters in line of sight
8 For mobile phones
Setup
Pairing your headset with your mobile phone
NOTE:
Before use, please charge your headset (see p. 8).
Before you use your Jabra JX10 with a mobile phone, you need to pair it with your
mobile phone.
•
Make sure the headset is on.
•
Press the pairing button .
•
Set your Bluetooth® phone to ‘discover’ the Jabra JX10:
o Follow your phone’s instruction guide. This usually involves going to a ‘setup,’
‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to ‘discover’
or ‘add’ a Bluetooth® device.
o Your phone will find the Jabra JX10 and will ask if you want to pair with it.
•
Accept pairing by pressing Yes/OK (or similar) on the phone and confirm with the
passkey or PIN ‘0000’ (4 zeros).
•
Your phone will confirm when pairing is complete. If pairing is unsuccessful, repeat
the steps above.
NOTE:
If you accidentally put the headset into pairing mode, tap the pairing button  to
exit pairing mode.
IMPORTANT: The same headset can be paired with multiple mobile phones. However,
if you have multiple mobile phones paired, switched on and within range of the headset, the
headset will not be able to connect to the Bluetooth Hub. It is only possible to be connected to
one mobile phone and the Bluetooth Hub at a time. To be able to connect with the Bluetooth
Hub, only have one paired mobile phone turned on and within range of the headset.
22
English