User's Manual

Charging your headset

Make sure that your Jabra JX10 Headset is fully charged before you start using it. The

first full charge takes approximately 2 hours.

You have two options for charging the headset from a mains power supply.

Charging from your desk stand (Fig. 3)

Fig. 3

•

Connect your AC power adaptor to the desk stand and to the power supply.

•

Place your headset in the cradle.

Using the AC adaptor to charge directly from a power socket (Fig. 4)

Fig. 4

•

Plug the headset into the power source using the headset power supply .

IMPORTANT: Make sure your headset is inactive before charging. If you are on an active

call, transfer the call to your handset before you charge your headset.

NOTE:

You can also charge you headset via a USB/PC cable or car charger.

When the LED

 is solid red, your headset is charging. When the LED is green, it is fully

charged.

If the headset is turned on when you put it into the charger, it will remain on while

charging and when disconnected from the charger.

If your headset is turned off when you charge it, it will remain off while charging and

when disconnected from the charger.

English