USER MANUAL
Thank you . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 About your Jabra BT3030 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What your headset can do . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 english english GETTING STARTED . . . . . . . . . . . . . . . . . . . . . . . . . . .
Thank you for purchasing the Jabra BT3030 Bluetooth® headset. We hope you enjoy it! This instruction manual will get you started and ready to make the most of your headset. About your Jabra BT3030 english Thank you 1 Headphone connector plug (3.
The Jabra BT3030 lets you listen to stereo music through your Bluetooth enabled mobile phone or music player, while ensuring that you never miss a call.
• IP22 compliant (The Jabra BT3030 can withstand a short rain shower) Please note that your Jabra BT3030 can withstand a short rain shower but is not waterproof and cannot be submerged. If your device gets wet, it should be wiped clean of any traces of water in order to protect it from potential damage. english • Qualified for Bluetooth Specification version 2.
Make sure that your headset is fully charged for 2 hours before you start using it. Use the AC power supply to charge from a power socket. When the light indicator (LED) is flashing with a green light, your headset is charging. When the headset is fully charged the LED light will show a solid green light. english Charge your headset Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period.
Pairing your headset with your phone Headsets are connected to phones using a procedure called ‘pairing’. By following a few simple steps, a phone can easily be paired with a headset. english Please note that the LED indicator light turns off after 1 minute to save battery. To check if the headset is on, tap the answer/end button once – the LED indicator light will flash, if the headset is on. 1.
Wear it how you like it english In case of unsuccessful pairing, put the Jabra BT3030 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 4 seconds until the LED has a constant blue light. The LED will flash before the light is constant – keep holding down the button until the light is constant. Your Jabra BT3030 is designed to be comfortably worn using the removable clothing clip, fig. 2A or a lanyard strap, fig. 2B.
Answer a call when playing music • When you end the call, your music will start again**. Skip one track forward - continue tapping to skip • Tap the Skip Forward button several tracks forward. english and the music will be paused • Tap the Answer/End button and the call will be connected. Skip one track back • Tap the Skip Back button several tracks backward. - continue tapping to skip Fast Forward . • Press and hold Skip Forward button Fast Rewind • Press and hold Skip Back button .
Redial last number** Call waiting and placing a call on hold** • This lets you place a call on hold during conversation to answer an incoming call. • Press the Answer/End button once to put the active call on hold and answer the incoming call. english • Double tap the Answer/End button. • Press the Answer/End button to switch between the two calls. • Tap the Answer/End button to end the active conversation. Adjust sound and volume • Press the volume up or down (+ or -) to adjust the volume.
What the lights means What you see What it means Solid light: In pairing mode – see Pairing section Slow single flash: Connected to phone and in standby mode Slow double flash: Connected to phone and active on call* Slow triple flash: Not connected to phone and standby mode* Quick double flash: Incoming/Outgoing call Triple flash: Headset on but not connected to phone* 5 quick flashes: Pairing succeeded* english If you are using another set of earphones other than the supplied Jabra model,
I hear crackling noises • Bluetooth is a radio technology which means it is sensitive to objects between the headset and the device it is connected to. You should be able to have up to 10 metres (33 feet) of distance between the headset and the connected device when there are no major objects in the way (walls, etc.). english Troubleshooting & FAQ I cannot hear the phone call in the headset • Increase the volume on the Jabra BT3030.
Some phones may stat the music player once it connects to the headset. Re-pair your headset to the device in order to avoid this behaviour. 1. Make sure the headset is off 2. Press and hold the answer / end button for approx 5 sec until the light turns solid blue english The music player starts playing when connecting to the headset 3. Continue press and hold the answer / end button until the solid blue light turns off 4.
Headsets are capable of delivering sounds at loud volumes and high pitched tones. Exposure to such sounds can result in permanent hearing loss damage. The volume level may vary based on conditions such as the phone you are using, its reception and volume settings, and the environment. Please read the safety guidelines below prior to using this headset. english Warning! Safety guidelines 1.
• The plastic bags the product and its parts are wrapped in are not toys forchildren. The bags themselves or the many small parts they contain may cause choking if ingested. Never try to dismantle the product yourself. None of the internal components can be replaced or repaired by users. english 3. Keep out of reach of children: Only authorised dealers or service centres may open the product.
The Following information must be presented to obtain Warranty Service: (a) the product, and (b) proof of purchase, which clearly indicates the name and address of the seller, the date of purchase and the product type, which is evidence that this product is within the Warranty Period. Please further include (c) your return address. (d) daytime telephone number, and (e) reason for return.
english REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER. GN SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED TO THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. english installation.
1. Bluetooth is a radio technology that connects devices, such as mobile phones and headsets, without wires or cords over a short distance (approx. 33 feet). Get more information at www.bluetooth.com 2. Bluetooth profiles are the different ways that Bluetooth devices communicate with other devices. Bluetooth phones support either the headset profile, the hands-free profile or both.
© 2007 GN US, inc. All rights reserved. Jabra® is a registered trademark of GN A/S. All other trademarks included herein are the property of their respective owners. The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN US, inc. is under license. (Design and specifications subject to change without notice). www.jabra.