User Manual

4 5
1.2 GN 6110 – Parts and signatures
1 Power adapter socket
2 Telephone socket
3 Handset socket
4 Hook switch [AUX] socket (accessory)
5 Additional functionality port
6 Volume match dial
7 Microphone volume dial
8 Reset button
9 Clear dial tone termination switch
10 Base Multifunction Button (MFB)
11 Pairing indicator
12 Battery indicator
13 On-line indicator
14 Charging cradle
15 Headset release button
16 Headset boom arm
17 Earhook
18 Charging port
19 Speaker
20 Volume buttons
21 Headset Multifunction Button (MFB)
22 Microphone
23 Headset indicator
2. Assembling your GN 6110
First assemble your GN 6110 to work with your desk telephone, and then set it up to
work with your mobile phone. The GN 6110 supports the GN 1000 Remote Handset
Lifter for desk telephones as well as newer telephones with built-in electronic hook
switches.
See Section 4.3 for hook switch set up instructions and use.
2.1 Setting up for desk telephone use
Connecting cords
To set up your GN 6110, connect the cords by
completing the following instructions:
1. Connect the power adapter cord to the socket
marked 2 [A]. All of the base’s indicators
will fl ash once when power is connected.
2. Unplug your telephone’s handset from the
handset port on the bottom of your tele-
phone and plug its cord into the base’s socket
marked 0 . [C]
3. The blue colored cord will go from the blue
socket on the base back to the now free hand-
set port. [B].
4. Place all cords into the base’s slots to ensure
a fully functional product. [D]
G
F
E
D
C
B
A
AUX
2
1
16
12
10
17
6
22
3
4
14
11
7
8
15
19
21
18
20
23
13
5
9
AUX
A
B
C
D
E
AUX
GN6110_contents_EU_21-10-03.indd 4-5 23-10-2003, 09:39:21