User's Manual

GN 9050 Beta User Manual

6. Using the Headset

Press the On/Off Headset Handset button to put the system in headset mode.

The headset mode light on the top of the remote blinks and the In Use indicator

on the base station illuminates.

7. Put the headset on and select a telephone compatibility setting until dial tone is

clear. If dial tone is clear for both A and G set to A.

8. Remove the handset and make a call. While switching between the headset and

the handset, adjust the transmit (microphone) setting until your voice is the same

volume on both devices. (1 is softest, 8 is loudest)

9. Use the remote to adjust the receive (speaker) volume. IF your telephone has

volume control, set it to mid-range.

10. To roam up to 150 from the base, remove the remote from the base station and

clip it to your belt, pocket or shirt.