User's Manual

GN 9050 Beta User Manual

Component list

1. Base station

2. Base stand

3. Remote

4. Interface cord

5. AC adapter

6. Battery

Remote Beltpack Functions

1. Headset Mode indicator-blinks when the system is in Headset mode, no light when

in handset mode.

1. Volume control- press + to increase volume and – to decrease volume

2. Mute button: Press to activate mute and press again to unmute.

3. Headset/Handset button/ handset lifter button: Press to enter Headset or Handset

mode (LEDs on the remote and base station light in Headset mode) No Lights in

Handset Mode. For use with optional handset lifter device, see handset lifter user

manual.

Base Functions

1. Transmit Settings: Adjusts the volume of your voice.

2. Telephone Compatibility Settings: Fine-tunes the system to your telephone system.

3. Battery Charge indicator: Lights when the remote is properly seated in the base

charger, blinks when battery is fully charged.

4. Base/Tone Control: Allows for choice of base and tone on receiver volume.

Audio Indicators

Mute Tone sounds in headset every 15 seconds

Out of Range Tone sounds in headset every 10 seconds

Low Battery Tone sounds in headset every 20 seconds

Volume Tone sounds in headset at max and min levels