Safety data sheet

Edition: Sept. 2014
The Master document is located electronically. Printed copies of this document are not controlled, unless identified as such. The USER has to assure the document is valid prior to use.
I
NFORMATION FOR THE SAFE HANDLING OF
L
EAD
-A
CID BATTERIES
1. Identification of Product and Company
Trade Name / Type: Baureihen Sonnenschein A500, A400, GF-Y, Sonnenschein Solar 18Ah
Manufacturer
Company: Exide Technologies GmbH
Address: Im Thiergarten 63654 Büdingen - Deutschland
Phone: +49 (0) 6042/ 81 - 0
2. Hazards Identification
No hazards occur during the normal operation of a Lead Acid Battery as it is described in the
instructions for use that are provided with the Battery. Lead-acid Batteries have three significant
characteristics:
They contain an electrolyte which contains diluted sulphuric acid. Sulphuric acid may cause
severe chemical burns.
During the charging process or during operation they might develop hydrogen gas and
oxygen, which under certain circumstances may result in an explosive mixture.
They can contain a considerable amount of energy, which may be a source of high electrical
current and a severe electrical shock in the event of a short circuit.
The Batteries have to be marked with the symbols listed under item 15.
3. Composition and Information on the main Ingredients
1)
CAS no. Description Content
[% of weight]
7439-92-1 Lead Grid
(metallic lead, lead alloys with possible traces of additives)
~ 32
n.a. Active Mass
2
(Battery Oxide, inorganic lead compounds)
~ 32
7664-93-9 Electrolyte
3
(diluted sulphuric acid with additives)
~ 29
Plastic Container / Plastic Parts
4
~ 7
1
Contents may vary due to performance data of the Battery
2
Composition of active mass depends on the state of charge
3
Density of the electrolyte varies in accordance to the state of charge
4
Composition of the plastic may vary due to different customer requirements

Summary of content (18 pages)