Solar Controller User Manual (GP-PWM-10-FM)
Table Of Contents
- 1.0 Installation Overview
- 2.0 IMPORTANT SAFETY INSTRUCTIONS
- 3.0 Tools and Materials Needed
- 4.0 Choosing a Location
- 5.0 Installation Instructions
- 6.0 Wiring Diagram
- 7.0 Operating Instructions
- 8.0 Display Symbols
- 9.0 USB Charging
- 10.0 Frequently Asked Questions (FAQs)
- 11.0 Troubleshooting Problems
- 12.0 Limited Warranty
- 13.0 Installation Template
GP-PWM-10-FM
18
© 2018 Go Power!
8.0 Display Symbols
Symbol
Indicator For:
Day Time: PV Charge Current
Night Time
Battery Voltage
Battery State of Charge
SEALED
Sealed/Gel
AGM
AGM/LFP
FLOODED
Flooded
Other Symbols
USB charger on
(When charger is off, no symbol will show)
LOW
Battery voltage is lower than
11.0 VDC
Whole display will start to blink Battery voltage > 15.5 VDC
Battery State of Charge
Symbol
Battery Voltage
Shows only after full Boost
or Equalization Cycle
>= 12.6 VDC
>= 11.8 -12.6 VDC
> 11.0 -11.8 VDC