User Manual

[page 4] | gpelectric.com
®
Welcome to the Go Power! Portable Solar Kit Installation Guide. Please read all instructions contained within this manual to gain a full
understanding of how to install and use this product. Please visit gpelectric.com for the most current version of this manual.
Visit our Go Power! YouTube channel to watch a two minute video on setting up a portable solar kit.
Veuillez visiter gpelectric.com pour la version française de ce manuel de l’utilisateur | Visite gpelectric.com para la versión en es-
pañol de este manual del usuario
2.1 WARNINGS
Disconnect all power
sources
Electricity can be very dangerous. Take appropriate caution when making connections.
Battery and wiring safety Observe all safety precautions of the battery manufacturer when handling or working
around batteries. When charging, batteries produce hydrogen gas, which is highly
explosive. Ensure batteries are in a well-ventilated space, away from sparks for open
ames.
Wiring connections Ensure all connections are tight and secure. Loose connections may generate
sparks and heat. Be sure to check all connections before using the portable solar kit.
Observe correct polarity Reverse polarity of the battery terminals and array will cause the controller to give a
warning tone. The controller will not function unless battery terminals are connected to
a battery with proper polarity. Failure to correct this fault could damage the controller.
Do not exceed the
Charge Controller cur-
rent and voltage ratings
Refer to charge controller manual for details.
Do not leave the device
outside in inclement
weather or rain, or
unattended
This kit is not weatherproof. Never leave your Portable Solar Kit unattended, plugged
in overnight, or subject to inclement weather.
2. GENERAL INFORMATION
3. FEATURES AND ACCESSORIES
Description No Description
1 Handle 10 Fuse
2 Latches 11 Protective carrying case
3 Aluminum frame 12 Corner protection
4 Aluminum support legs 13 Protective feet
5 Solar charge controller 14 Quick connect dust cover
6 Junction box 15 Ring terminals (for permanent mounting)
7 Cables 16 SAE Solar Plug (for connecting to RVs)
8 Battery clamps 17 2-Pin XLR Connector to Anderson Connector
9 Quick connect cable