User Manual
gpelectric.com | [page 9]
®
Push the B Button to show the battery state of charge (shown
as a percentage).
Icons Displayed: Battery SOC, Percent Symbol (%)
5.6 ERRORS
Over Voltage
If the GP-PWM-10 experiences a battery over voltage (15.5V),
the controller will stop operating and the display will begin to
ash with all icons. The controller will resume operating when
the error is cleared.
Icons Displayed: All symbols blinking
Low Voltage
If the battery state of charge reaches 0%, the battery SOC
symbol will show the text “LOW” beneath it. The controller will
continue operating in this condition and will only stop operating if
the battery voltage drops below 6 volts.
Icons Displayed: Battery SOC Symbol, LOW
OPERATION