Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino 90001PS Rhino Bed Bars Front Main A Bar

Parts List:

i) 4- Plastic cover

Not Includes:

1- LEG Driver side

4- 3/8 x 5" Carriage bolt

B type Main bar

b) 1- LEG Passenger side

8- 3/8 x 1 1/2" Flat washer Kicker

c) 1- Cross Bar

8- 3/8" Nut

d) 2- Mounting plate

8- 3/8 x 1 1/2" Carriage bolt

e) 2- Tube spacer

2- 3/8 x 1 1/2" Flat head bolt

(1) Hardware kit includes:

2- 3/8x5 1/2x2" Hex head bolt

8- Plastic flat washer

2- 3/8" Flat washer

2- Round plastic gasket

2- Whrite plastic washer

2- Rectangle plastic garket

Required tools:

9/16" Wrench Hand drill

7/32" Allen wrench

7/16" Bit

Instructions:

Cleaning and care instructions:

Revisado

Aprox. Installation time: 50 min.

04/08/2009

Keep your product clean. Do not use abrasive cleaners or polish. We recommend only non-abrasive automotive wax such as

pure carnauba to avoid scratches or rust.

Design: Quality:

PS / B / C

Pencil

90001, 91001, 91501, 92001, 93001, 94001, 95001, 96001, 97001 y 98001

A type MAIN BAR

INSTALLATION INSTRUCTIONS

1. Read carefully and understand instructions before beginning installation. If you can not find any listed part, please stop

installation and call to your distributor to get the missing parts, on the last page mentions Main Bar B and Kicker, these

accessories are sold separately.

2. Place the bottom

mounting plate to the

side tube , as shown in

picture 1 and 1.1

Pict. 1

Pict. 1.1

3/8x1 1/2" Flat head bolt

Mounting plate

Round plastic

gasket

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS A type MAIN BAR 90001, 91001, 91501, 92001, 93001, 94001, 95001, 96001, 97001 y 98001 PS / B / C i) 4- Plastic cover Parts List: Not Includes: a) 1- LEG Driver side 4- 3/8 x 5" Carriage bolt B type Main bar b) 1- LEG Passenger side 8- 3/8 x 1 1/2" Flat washer Kicker c) 1- Cross Bar 8- 3/8" Nut d) 2- Mounting plate 8- 3/8 x 1 1/2" Carriage bolt e) 2- Tube spacer 2- 3/8 x 1 1/2" Flat head bolt (1) Hardware kit includes: 2- 3/8x5 1/2x2" Hex head bolt f) 8- Plastic flat washer 2- 3/8"
PAGE 2
INSTALLATION INSTRUCTIONS A type MAIN BAR 90001, 91001, 91501, 92001, 93001, 94001, 95001, 96001, 97001 y 98001 PS / B / C Pict. 2.1 Pict. 2 Insert the central tube in the leg. Align the holes marked 3. Assemble the Main Bar according to the pictures 2, 2.1 y 2.2 Img. 2.2 Pict. 2.2 Repeat steps for driver side Cleaning and care instructions: Design: Quality: Keep your product clean. Do not use abrasive cleaners or polish.
PAGE 3
INSTALLATION INSTRUCTIONS A type MAIN BAR 90001, 91001, 91501, 92001, 93001, 94001, 95001, 96001, 97001 y 98001 PS / B / C 3. Place the frame on the floor of the box, with a pencil mark the locations. to set main bar on both sides of the truck pict 3 Pict. 4 4. Remove the Main bar and drill 7/16" holes pict 4 5. Relocate the Main bar, and attach it to the floor of the box. Pict 5 Pict. 3 Pict. 5 3/8x1 1/2" Carriage bolt.
PAGE 4
INSTALLATION INSTRUCTIONS A type MAIN BAR 90001, 91001, 91501, 92001, 93001, 94001, 95001, 96001, 97001 y 98001 PS / B / C 6. Follow the instructions contained in the B Bar B to assemble, and to keep the armed continue with step 7. 7. 6 and 6.1 The image shows you how to assemble your Bed Bar with a Type A Type B Pict. 6 Main bar type Main bar type A Kicker Pict. 6.1 Acquiring the necessary parts, you can make the following settings. Images 7, 7.1 and 7.2 Pict.