Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino 90002PS Rhino Bed Bars Rear Main B Bar

i) 4- 7/16" Plastic cap

Not Includes:

1- Driver Leg

8- 3/8x1 1/2" Flat washer

Kicker

1- Passenger Leg

8- 3/8" Hex nut

1- Cross bar

4- 3/8x 1 1/2" Carriage bolt

d) 2- Mounting plate

4- 3/8x 5" Carriage bolt

2- White plastic washer

e) 8- Small plastic washer

2- 3/8x1" Hex head bolt

f) 2- Round plastic gasket

2- 3/8x1 1/2" Flat head bolt

g) 2- Rectangle plastic gasket

2- 3/8" Flat washer

2- 7/16" X 1 1/8 Rubber cap

Required tools:

9/16" Wrench

Hand drill

7/32" allen Wrench

7/16" Bit

Instructions:

Cleaning and care instructions:

Checked 04/08/2009

INSTALLATION INSTRUCTIONS

90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, 97002 y 98002

Parts List:

(1) Hardware kit includes:

MAIN BAR TIPO B

Pencil

Keep your product clean. Do not use abrasive cleaners or polish. We recommend only non-abrasive automotive wax such

as pure carnauba to avoid scratches or rust.

Design: Quality:

Aprox. Installation time: 50 min.

PS / B / C

1. Read carefully and understand instructions before beginning installation. If you can not find any listed part, please stop

installation and call to your distributor to get the missing parts.

Img. 1

Img. 1.1

2. Place the bottom

mounting plate to the

leg, as shown in picture

1 and 1.1

3/8x1 1/2" Flat head bolt

Mountin

g plate

Round

plastic

gasket

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS MAIN BAR TIPO B 90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, 97002 y 98002 PS / B / C Parts List: a) 1- Driver Leg b) 1- Passenger Leg c) 1- Cross bar d) 2- Mounting plate (1) Hardware kit includes: e) 8- Small plastic washer f) 2- Round plastic gasket g) 2- Rectangle plastic gasket h) 2- 7/16" X 1 1/8 Rubber cap Required tools: 9/16" Wrench 7/32" allen Wrench Instructions: Hand drill 7/16" Bit i) 4- 7/16" Plastic cap 8- 3/8x1 1/2" Flat washer 8- 3/8" Hex nut 4- 3/8x 1
PAGE 2
INSTALLATION INSTRUCTIONS MAIN BAR TIPO B 90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, 97002 y 98002 PS / B / C Threaded hole on top Img. 2 Img. 2.1 Insert the central tube into the leg. Front 3. Assemble the Main Bar according to the pictures 2, 2.1 y 2.2 white plastic washer 3/8" flat washer 3/8x1 1/2" hex head bolt Img. 2.2 Repeat above to the other side. Cleaning and care instructions: Design: Quality: Keep your product clean. Do not use abrasive cleaners or polish.
PAGE 3
INSTALLATION INSTRUCTIONS MAIN BAR TIPO B 90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, 97002 y 98002 PS / B / C 4. Place bar assembly onto the truck bed floor and mark with a pencil the holes to drill at driver and passenger side. Image 3. Img. 4 5. Proceed to drill where the marks were made. Image 4. 6. Place the bar assembly and secure to the vehicle using 3/8 x 1" carriage head bolt and corresponding hardware. Image 5 Img. 3 Img.
PAGE 4
INSTALLATION INSTRUCTIONS MAIN BAR TIPO B 90002, 91002, 91502, 92002, 93002, 94002, 95002, 96002, 97002 y 98002 PS / B / C Img. 6 Main bar type B Kicker Bed Bar & Kicker Assembly Acquiring the necessary parts, you can make the following settings. Images 7, 7.1 y 7.2 Img. 7 1 BED BAR A 1 BED BAR B 1 KICKER Img. 7.1 1 BED BAR A 1 BED BAR B 2 KICKER Img. 7.2 2 BED BAR A 1 BED BAR B 2 KICKER 1 KIT 600 8.