Owners manual

ManualsBrandsGO RHINO ManualsAutomotiveGo Rhino 9370C Rhino Bed Bars Kickers

Parts List: 8- 3/8 x 1 1/2" Flat washer Not Includes:

1- Kicker Driver side

8- 3/8" Nut

B type main bar

b) 1- Kicker Passenger side

8- 3/8 x 1 1/2" Carriage bolt

c) 2- Mounting plate

2- 3/8 x 1 1/2" Flat head bolt

(1) Hardware kit includes: 2- 3/8x5 1/2x2" Hex bolt

d) 8- Plastic flat washer

2- 3/8" Flat washer

2- Round plastic gasket

2- White plastic washer

2- Scuare plastic garket

4- Plastic tube cover

Required tools:

9/16" Wrench Hand drill

7/32" Allen wrench

7/16" Bit

Instructions:

Cleaning and care instructions:

Revisado

INSTALLATION INSTRUCTIONS

9370, 9390, 9516, 9519, 9520, 9530, 9546, 9552, 9558, 9560 and 9590

KICKER

PS / B / C

Pencil

Design: Quality:

05/08/2009

Keep your product clean. Do not use abrasive cleaners or polish. We recommend only non-abrasive automotive wax such as

pure carnauba to avoid scratches or rust.

Aprox. Installation time: 50 min.

1. Read carefully and understand instructions before beginning installation. If you can not find any listed part, please stop

installation and call to your distributor to get the missing parts, on the last page mentions Bed Bar B, these accessorie are

sold separately.

2. Place the mounting

plate to the tube as

shown on image 1 y 1.1

Img. 1

Img. 1.1

3/8x1 1/2" Flat head bolt

Mounting

plate

Round

plastic

gasket

Summary of content (3 pages)

PAGE 1
INSTALLATION INSTRUCTIONS KICKER 9370, 9390, 9516, 9519, 9520, 9530, 9546, 9552, 9558, 9560 and 9590 PS / B / C Parts List: a) 1- Kicker Driver side b) 1- Kicker Passenger side c) 2- Mounting plate (1) Hardware kit includes: d) 8- Plastic flat washer e) 2- Round plastic gasket f) 2- Scuare plastic garket g) 4- Plastic tube cover 8- 3/8 x 1 1/2" Flat washer 8- 3/8" Nut 8- 3/8 x 1 1/2" Carriage bolt 2- 3/8 x 1 1/2" Flat head bolt 2- 3/8x5 1/2x2" Hex bolt 2- 3/8" Flat washer 2- White plastic washer Not Inclu
PAGE 2
INSTALLATION INSTRUCTIONS KICKER 9370, 9390, 9516, 9519, 9520, 9530, 9546, 9552, 9558, 9560 and 9590 PS / B / C 3. Place the kicker to the main bar, mark with a pencil the 4 points to be drilled. See Image 2 and 2.1 Img. 2 4. Remove the part to drill with a 7/16" bit. See Image 3 5. Place again the Kicker and attach to the main bar and the floor of the box. See image 4 y 4.1 Img. 2.1 Img. 3 Img. 4 3/8x5 1/2" Hex head bolt 3/8" Flat washer Img. 4.
PAGE 3
INSTALLATION INSTRUCTIONS KICKER 9370, 9390, 9516, 9519, 9520, 9530, 9546, 9552, 9558, 9560 and 9590 PS / B / C Img. 5 Main bar type B Kicker Assembly Main Bar and Kicker Acquiring the necessary parts, you can make the following settings. Images 6, 6.1 and 6.2 Img. 6 1 MAIN BAR A 1 MAIN BAR B 1 KICKER Img. 6.1 1 MAIN BAR A 1 MAIN BAR B 2 KICKER Img. 6.2 2 MAIN BAR A 1 MAIN BAR B 2 KICKER 1 KIT 600 8. Align Bed Bar, and then tighten all bolts, from bottom to up. 9.