Owners manual

2 | P a g e
Installation
This installation uses 4 brackets per side, (Photo 1).
Step-1 Begin the installation on the passenger side. Starting at the front of the vehicle, locate and
remove the plastic plugs in the back side and bottom of rocker panel to expose the holes used for
placement of the M8 Clip- Nuts, (Photo 2).
Step-2 Install M8 Clip-Nuts in the rocker panel with the threaded end centered over the smaller hole,
(Photo 3).
Photo 1
1
1
1
1
Photo 2
Passenger
Side Front
Photo 3
Passenger
Side Front