Owners manual

4 | P a g e
Step-5 Attach the passenger side step to each bracket using (2) M8 hex bolts, (4) 5/16” flat washers, (2) 5/16”
lock washers, and (2) M8 hex nuts, (Photo 8 & 9).
Step-6 Align the side step with the vehicle and tighten all bracket and side step nuts and bolts, (Photo 10).
Repeat the above steps to install the driver side brackets and side step. Remember to check and retighten the
bolts periodically.
Photo 8
Passenger
Side Front
Photo 9
Passenger
Side Rear
Photo 10
Passenger Side