Owners manual

INSTALLATION INSTRUCTIONS
Exhaust Tip
Parts List:
x1 Exhaust Tip
x1 Clamp
Required Tools (not included):
A. Ratchet
B. 15mm socket/wrench
Steps:
1. Clean exhaust pipe to ease the instalation.
2. Place the clamp on the narrow part of the tip (See picture above). Adjust it, do not tighten yet.
3. Place the exhaust tip over the pipe.
4. Tighten the nut with a 15mm socket/wrench to 40Lb/ft (55 N/m).
5. Revise periodically and re-tighten if necessary.
R&D QA FODI7.003.I Page 1/1