DVD Recorder + VCR User Manual VR2945

CONNECTIONS

Progressive Scan Connection

• If your television is a high-definition or ‘digital ready‘ television, you may take advantage of the DVD

Recorder+VCR’s Progressive Scan output for the highest video resolution possible.

• If your TV does not accept the Progressive Scan format, the picture will appear scrambled.

Connect the COMPONENT/PROGRESSIVE VIDEO OUT jacks on the DVD Recorder+VCR to the corresponding

in jacks on your TV using an optional Y Pb Pr cable (C).

Connect the Left and Right AUDIO OUT jacks from the DVD Recorder+VCR to the left/right audio in jacks on

your TV using the supplied audio cables (A).

• Be sure to set the DVD Recorder+VCR to Progressive Scan mode by pressing and holding [P.SCAN] for 3 seconds

(or changing the Scan Mode in the Setup Menu; see page 27).

• Progressive Scan does not work with the RF, Audio/Video or S-Video connections.

Connections

DF-L72B1N-BS(GB) 04.7.1 3:9 AM 페이지17