DVD Recorder + VCR User Manual VR2945

Some TV programs are broadcast with both a main and a Secondary Audio Program (SAP). You can change the
TV audio using the [AUDIO] button.
Press [AUDIO] repeatedly to change the TV audio, according to the Broadcast audio signal as shown below.
• STEREO+SAP Audio Signal
Stereo ➝ Mono (No display) ➝ SAP ➝ Stereo
• STEREO Audio Signal
Stereo ➝ Mono(No display) ➝ Stereo
• SAP Audio Signal
Mono ➝ SAP ➝ Mono
• MONO Audio Signal
Mono(No display)
The current audio channel is displayed on-screen.
• If SAP is selected, but there is no SAP channel being broadcast, you will still hear the main audio channel.
• If the sound is poor quality when set to Stereo, you can often improve it by changing to Mono.
• When an external input is selected, the audio channel can be switched only to Stereo.
Title
Shows the current title number and total number of titles, and skips to the desired title number.
1 Press [DISPLAY] during playback. The on-screen display appears on the TV screen.
2 Use […†] to select the ‘Title‘ icon on the on-screen display. Press [ENTER] to display a submenu.
3 Use […†] to change the numbers.
4 Press [ENTER] to confirm.
36
On-Screen Display Overview
During DVD playback, press [DISPLAY] to show information about the current disc.
While the disc information is displayed, press [DISPLAY] again to show the disc
remaining time.
Changing the TV Audio Channel
OSD Menu Options for DVD
DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지36