DVD Recorder + VCR User Manual VR2945

DVD Playback

Press the [DVD] button to set the remote control to operate the DVD deck.

Turn the TV on and select the video input source connected to the DVD Recorder+VCR.

Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.

2 Press [EJECT] to open the disc tray.

3 Load your disc in the tray with the playback side down (label side up).

4 Press [EJECT] to close the tray.

READING appears on the front panel display, and playback starts automatically. If playback does not start,

press [PLAY (

√

)]. In some cases, the Disc menu might appear instead.

Playing a DVD+R (+RW)

When a DVD+RW or unfinalized DVD+R is inserted, no title is played automatically but the current TV channel

displays on the screen.

If you want to play a title on the DVD+R (+RW), you must press [MENU] or [PLAY] to display the disc menu.

Select a title to play then press [ENTER].

Playing a DVD

If a Disc menu is displayed

• A Disc menu may be displayed when you load a DVD. Use the [

œ √…†

] buttons to select the title/chapter you

want to view, then press [ENTER] to start playback. Press [TITLE] or [MENU] to return to the Disc menu.

• If the Parental Level feature is set and the disc is below the current Parental Level setting, the 4-digit code must

be entered and/or the disc must be authorized; see ‘Set Parental Level‘ on page 30.

• The DVD Recorder+VCR will not play discs with Region codes different from the DVD Recorder+VCR. The Region

code for this DVD Recorder+VCR is 1 (one).

• Unless stated otherwise, all operations described below use the remote control. Some features may also be

available in the Setup menu.

• A disc which is recorded by computer at high speeds (greater than or equal to 2x) may not be recognized.

• A disc which is recorded with unauthorized movie material may not be played.

• A disc which is recorded by other recorder or not recorded correctly may not be recognized or played.

Still Picture and Frame-by-Frame Playback

Press [PLAY/PAUSE] during playback. The DVD Recorder+VCR will go into Pause mode.

You can back up or advance the picture frame-by-frame by pressing [FF (√√ )] repeatedly during Pause

mode.

Fast Forward/Backward

Press [REW (œœ )] or [FF (√√ )] during playback. The DVD Recorder+VCR will go into Search mode.

Press [REW] or [FF] to select the desired speed: √√ X2, √√ X4, √√ X8, √√ X16, √√ X32,

√

(forward) or

, œœ X2, œœ X4, œœ X8, œœ X16, œœ X32 (backward).

DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지38