DVD Recorder + VCR User Manual VR2945

You can copy the contents of a DVD to a VHS tape using the [DVD ➝ VCR] button.

1 Insert a Disc.

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2 Insert a VHS Tape.

Insert a blank VHS videotape into the VCR deck.

3 Select DVD mode by pressing [DVD] on the remote control or

pressing [DVD/VCR] on the front panel.

4 Find the place on the DVD (or Disc) from which you want to start

recording using the [PLAY/PAUSE], [REW] and [FF] functions.

For best results, pause playback at the point from which you

want to record.

5 Press [DVD ➝ VCR] on the front panel.

The Copy to VCR menu appears.

6 Press [REC SPEED] to select the desired Record Mode:

• SP (Standard Play)

• SLP (Super Long Play, 3 times SP).

7 Press [DVD ➝ VCR] again to start copying.

8 Stop the Copy Process

To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie

ends, or the unit may replay and record over and over again.

RECORDING

One Touch Copy - DVD to VHS

Basic Recording

• If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to

copy Macrovision encoded DVDs.

• Copy to VCR does not work in Progressive Scan Mode.

During one touch copy you can search or change REC SPEED and resume copy.

1 During One Touch Copy press [PLAY/PAUSE] to enter COPY EDIT mode.

2 Search with [FF/REW] or [NEXT/PREV] key.

3 Press [DVD ➝ VCR] and you can change REC SPEED.

4 Press [DVD ➝ VCR] again to resume copy

COPY EDIT (DVD ➝VCR)

Copy to Tape

Choose speed then

press COPY:

SLP

DVD Status

■ Stop – : – – : – –

00:00:32 02:03:27

DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지47