DVD Recorder + VCR User Manual VR2945

ManualsBrandsGo-Video ManualsDVRVR2945

RECORDING

The Timer Recording function allows you to record up to 8 programs within a period of one month.

1 Insert recordable media such as DVD+R ,DVD+RW, recordable VHS tape.

2 Press [TIMER].

The ‘Timer Recording’ menu appears.

Use […†] to move to a timer recording slot, and press [ENTER] to modify it.

If you did not set the clock on the DVD Recorder+VCR, you must do so before

programming a timer recording.

• Media - Choose desired media (DVD or VHS) using […†].

• Ch. – Choose the desired channel, or one of the external inputs from which

to record.

• Date – Choose a date up to 1 month in advance, or select a daily or weekly

program.

• Start Time – Set the recording start time.

• End Time – Set the recording end time.

• Mode – Choose a Record mode.

DVD: HQ, SP, SLP or EP

VCR: SP, SLP

3 Enter the necessary information for your Timer Recording(s).

•

œ √

– Moves the cursor left/right.

• …† – Changes the setting at the current cursor position.

• Press [SETUP] to exit the Timer Record menu.

• Press [ENTER] after filling in all the program information.

• Press [TIMER] to display the Timer Record List.

4 Press [ENTER] to save the program.

The Timer Record List will appear.

5 Press [SETUP] to exit the Timer Record List.

6 Timer indicator will light or blinking. Power Off the DVD Recorder+VCR to start

the Timer Recording.

Note

• The Timer indicator lights on the front panel display when the DVD Recorder+VCR is ready for the Timer

Recording.

• The tape timer indicator is blinking if any of the following meets if no recordable tape is inserted.

Both the disc and tape timer indicators are blinking if tape and disc timer recordings are overlapped.

• The DVD Recorder+VCR will record the audio according to the current TV tuner setting (Stereo, Mono or SAP). Use

the [AUDIO] button to set the audio before switching the DVD Recorder+VCR to Standby mode.

• The DVD Recorder+VCR will automatically power off when the Timer Recording ends.

• There is a short delay when a timer recording finishes to confirm the recorded program. If two timer recordings

are set to record sequentially (one right after the other), the very beginning of the later program may not be

recorded.

Timer Recording

CH No. Date Start End Mode

---- --/-- --:-- --:-- ---

Instructions

Enter-Edit Setup-Exit Move …†

Edit Timer

Media

CH No. CH-03

Date Jan/02 Sun

Start 01:36 AM

End 02:36 AM

Mode HQ

Repeat Once

Delete

Instructions

Enter-Save Setup-Exit

Timer Recording

CH No. Date Start End Mode

CH03 01/02

01:36AM 02:36AM

---- --/-- --:-- --:-- ---

Instructions

Enter-Edit Setup-Exit Move …†

DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지49