DVD Recorder + VCR User Manual VR2945

RECORDING

You can record from an external component, such as a camcorder or VCR, connected to any of the DVD

Recorder+VCR’s external inputs.

Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see pages

15 and 19.

2 Use [ …†] to select the external input to record from.

• Tuner: Built-in tuner

• LINE1 : Audio/Video on front panel

• LINE2 : Audio/Video Input on back panel

• DV: DV input on front panel.

3 Load a recordable disc or tape.

4 Set the desired Recording mode by pressing [REC MODE] repeatedly.

DVD: HQ (High Quality - 1 hr/disc), SP (Standard Quality - 2 hrs/disc), EP (Average Quality - 4 hrs/disc), or

SLP (Low Quality - 6 hrs/disc).

VCR: SP (Standard Play), SLP (Super Long Play - 3 times SP)

5 Press [REC (●)] once.

Recording will start. The REC indicator lights on the front panel display.

Recording continues until you press [STOP] or the disc is full.

To record for a fixed length of time, see ‘One Touch Record‘ on page 46.

6 Press [STOP (■)] to stop recording.

Recording from External Components

Note

• If your source is copy-protected, you will not be able to record it using the DVD Recorder+VCR. See ‘Copyright

Notice‘ on page 7 for more details.

Recording from an External Input

DF-L72B1N-BS(GB) 04.7.1 3:10 AM 페이지51