DVD Recorder+VCR VR4940 User Manual
Safety Precautions CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing. This product does not contain any parts that can be repaired by the user.
Table of Contents INTRODUCTION VR4940 Overview. . . . . . . . . . . . . . . . . . . . . 6-9 Recordable Discs . . . . . . . . . . . . . . . . . . . . . . . 6 Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . 6 Disc-related Terms . . . . . . . . . . . . . . . . . . . . . . 6 Types of video CDs . . . . . . . . . . . . . . . . . . . . . 6 About DVD-R and DVD-RW Discs . . . . . . . . . . 7 What are ‘Recording Modes’? . . . . . . . . . . . . . . 7 • Is Editing a DVD like Editing a Videotape? .
Table of Contents DVD and Video CD Playback . . . . . . . . . . . 30-33 Playing a DVD or Video CD . . . . . . . . . . . . . . 30 • Selecting Titles . . . . . . . . . . . . . . . . . . . . 30 • Selecting Chapters . . . . . . . . . . . . . . . . . . 30 • Slow Motion . . . . . . . . . . . . . . . . . . . . . . . 30 • Still Picture and Frame-by-Frame Playback . 31 • Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Random . . . . . . . . . . . . . . . . . . . . . . . . . . 31 • Repeat . . . . .
VR4940 Overview Recordable Discs When you buy recordable discs, look for products with the following logos: 12cm/8cm, single-sided, single layer disc. Approx. max. recording time (LP mode): 240 minutes (4.7GB), 80 minutes (1.46GB) 12cm/8cm, single-sided, single layer disc. Approx. max. recording time (LP mode): 240 minutes (4.7GB), 80 minutes (1.46GB) otes – The DVD Recorder+VCR cannot record on DVD+R, DVD+RW, CD-R or CD-RW discs.
About DVD-R and DVD-RW Discs Is Editing a DVD like Editing a Videotape? How are DVD-R and DVD-RW discs different? DVD-R is a record-once medium, while DVD-RW is a re-recordable/erasable medium. You can re-record/ erase a DVD-RW disc approximately 1,000 times. No. When you edit a videotape you need one video deck to play the original tape and another to record the edits. With DVD, you edit by making a “Playlist” of what to play and when to play it.
VR4940 Overview (Continued) Notes for Recording Restrictions on Video Recording • The recording times shown are not exact because the DVD Recorder+VCR uses variable bit-rate video compression. This means that the exact recording time will depend on the material being recorded. • When recording a TV broadcast, if the reception is poor or the picture contains interference, the recording times may be shorter. • If you record still pictures or audio only, the recording time may be longer.
VR4940 Overview (Continued) Handling the Unit When shipping the unit The original shipping carton and packing materials come in handy. For maximum protection, re-pack the unit as it was originally packaged at the factory. When setting up the unit The picture and sound of a nearby TV, VCR, or radio may be distorted during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc.
Front Panel Overview POWER button and indicator Switches the DVD Recorder+VCR ON and OFF. Lights green when the DVD Recorder+VCR is turned on. EJECT (DVD) (Z) Opens or closes the disc tray. EJECT (VCR) Ejects the tape in the VCR deck. Cassette Compartment (VCR deck) Insert a video cassette here. SELECT DVD/VCR Toggles control between the DVD deck and the VCR deck. Disc Tray (DVD deck) Insert a disc here.
Front Panel Display Overview INTRODUCTION Disc Type indicators Indicates the type of disc loaded. Indicates that a timer recording is in progress or is programmed. REC Indicates that a recording is in progress. PRG Indicates that program playback is active. TTL Indicates current title number. Indicates a disc is inserted in the DVD deck. Indicates a VHS tape is inserted in the VCR deck. Indicates a DVD-RW disc (VR mode only) is inserted in the DVD deck.
Remote Control Overview POWER EJECT Turns DVD Recorder+VCR on and off. - Opens and closes disc tray. - Ejects tape in VCR deck. TV/VCR COPY Switches between the DVD Recorder+VCR tuner and your TV tuner. Copies DVD to VCR (or VCR to DVD). DVD CLEAR Selects DVD mode. VCR Selects VCR mode. INPUT Switches the DVD Recorder+VCR input to Tuner, AV1, AV2, or DV IN.
Rear Panel Overview AV 1 IN (VIDEO, L-AUDIO-R) Connect to the audio/video output of an external source (VCR, Camcorder, etc.). AV OUT (VIDEO, L-AUDIO-R) Connect to a TV with video and audio inputs. COMPONENT/PROGRESSIVE VIDEO OUT (Y Pb Pr) Connect to a TV with Component (Y Pb Pr) inputs. AUDIO OUT (L, R) Connect to a TV or other equipment with audio inputs. DVD + VCR OUT IN AV 1 AV OUT COMPONENT/ PROGRESSIVE VIDEO OUT AUDIO IN R R Pr R L L Pb L VIDEO VIDEO Y COAXIAL OUT (FROM ANT.
Connections ips There are a variety of ways to connect the DVD Recorder+VCR to your TV and other equipment. Use only one of the connections described below. Whichever TV connection you use will work with all input sources. Please refer to the manuals for your TV, VCR, stereo system or other devices as necessary to make the best connections. For better sound reproduction, connect the DVD Recorder+VCR’s AUDIO OUT jacks to the audio in jacks of your amplifier, receiver, stereo or audio/video equipment.
Connections (Continued) Connecting a TV Choose one of the following TV connections, depending on the capabilities of your equipment. ote All video signals are available from all video outputs. That means that whichever TV connection you use, it will work with all input sources, including VHS out of the Component/Progressive Video Output. RF Coaxial Connection Connect the RF OUT (TO TV) jack on the DVD Recorder+VCR to the antenna in jack on your TV using the supplied 75-ohm coaxial cable (R).
Connections (Continued) Connecting an Amplifier/Receiver Rear of DVD Recorder+VCR Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic Connect the Left and Right AUDIO OUT jacks on the DVD Recorder+VCR to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the supplied audio cables (A).
Connecting Optional Equipment Connect the AV 1 IN or AV 2 IN jacks on the DVD Recorder+VCR to the audio/video out jacks on your external component, using optional audio/video cables. ote If you use the S-VIDEO jack on the front panel, there will be no signal output from the front panel VIDEO jack. Connecting a Digital Camcorder Using the front panel DV IN jack, it is possible to connect a DV digital camcorder, video deck or DVD-R/RW recorder and digitally transfer DV tapes or DVD-R/RW discs to DVD-R/RW.
Initial Setup Setup Menu Overview The DVD Recorder+VCR Setup menu includes system settings in six categories GENERAL, LANGUAGE, AUDIO, LOCK, RECORD and DISC. Press SETUP on the remote control to view the first and second levels of the Setup menu, and press B to display the third level . You will see the “B” symbol on the right side of the menu label whenever additional levels are available. Setup Menu Navigation SETUP. 1 Press The Setup menu appears. 2 Use v / V to select the desired option.
Channel Add/Delete This feature allows you to manually add or delete channels from your channel list. v / V to select the Auto option then press 6 Use ENTER. The Auto option is set at the factory. In the Auto option, the DVD Recorder+VCR looks for a channel carrying XDS (Extended Data Services) information. XDS updates the clock using the Coordinated Universal Time. steps 1-3 as shown under Auto Channel 1 Follow Set. Use v / V to choose your Time Zone. Use v / V to select the CH. Add/Del option.
Initial Setup (Continued) TV Aspect Ratio Factory Setting 4:3 Letterbox: Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. 4:3 Fullscreen: Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off. 16:9 Widescreen: Select when a 16:9 widescreen TV is connected. If you wish, you can reset the DVD Recorder+VCR to its original factory settings.
Initial Setup (Continued) AUDIO Settings Each DVD disc has a variety of audio output options. Set the DVD Recorder+VCR’s Audio Output according to the type of audio system you use. Dolby Digital PCM: Select when connected to a 2-channel digital stereo amplifier. The DVD Recorder+VCR’s digital audio signal will be output in the PCM 2ch format when you play a DVD recorded with a Dolby Digital soundtrack.
Initial Setup (Continued) LOCK Settings Password Movie Rating Changing the 4-digit code The Lock feature allows you to prevent DVDs from being played based on their ratings or to have certain discs played with alternative scenes. Movie Rating Unlock Level 8(Adult) Level 7 Level 6 Level 5 Level 4 Level 3 Level 2 Level 1(Kid Safe) Password Country Code Prev. Select SETUP. 1 Press The Setup menu appears. 2 Use v / V to select the Lock option.
Country Code RECORD Settings Enter the 2-letter code for the country/area whose standards were used to rate your DVDs, referring to the “Country Code List” on page 54. DISC Record Mode Movie Rating You can set the default DVD recording quality to: SP (Standard, 2 hrs/disc), LP (Low, 4 hrs/disc), or XP (High, 1 hr/disc). Password Country Code U S DISC Record Mode VCR Record Mode DV Record Audio Auto Chapter Prev. VR Mode SP Video Mode SP Select SETUP. 1 Press The Setup menu appears.
Initial Setup (Continued) DV Record Audio DISC Settings You only need to set DV Record Audio if you have a digital camcorder with 32kHz/12-bit sound connected to the front panel DV IN jack. Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting. • With the Audio 1 setting, the sound that was recorded while shooting is used. • With the Audio 2 setting, the overdubbed sound is used.
DISC Finalize DISC Protect Finalizing a DVD-R/RW ‘locks’ its recordings in place so the disc can be played on most standard DVD players or computers equipped with DVD-ROM drives. Finalizing a disc formatted in Video mode will automatically create a menu screen for navigating the disc. This menu screen is accessible by pressing DISC MENU or TITLE. When a DVD-RW disc is formatted in VR mode, set DISC Protect to ON to prevent accidental recording, editing or erasing of the loaded disc.
Initial Setup (Continued) My DVD When you load a DVD with the My DVD feature turned on, the DVD Recorder+VCR will automatically search the disc for your Audio, Subtitle and Surround preferences and choose them if available on the disc. Set My DVD to ON or OFF. DISC Initialize DISC Finalize DISC Name DISC Protect PBC EZ Play My DVD OFF ON a name for the disc. Use v V b B to select 5 Enter a character, then press ENTER to confirm your selection.
Initial Setup (Continued) The On-Screen Display provides feedback on the status of the DVD Recorder+VCR and/or the currently loaded disc or tape. To access the On-Screen Display (or OSD), press the DISPLAY button. Displaying Disc Information To display information about the currently loaded disc or tape: On-screen display operation 1 the on-screen display, press DIS2 ToPLAYremove or RETURN (O) repeatedly until it disap- Press DISPLAY repeatedly to display/change the information displayed on-screen.
Initial Setup (Continued) OSD Menu Options by Media Type DVD Shows the elapsed playing time and total time. Shows the current title/chapter number and total number of titles/chapters DVD Title: 1/4 Chapter: 3/28 Menu Options 0:06:32 / 2:12:10 Function (Use v / V to select desired option) Title number 1/6 Chapter number 4/26 Time search - : -- : -- Audio language and Digital Audio Output mode Subtitle language 1. ABC Angle Sound 5.
OSD Menu Options by Media Type (Continued) Shows the elapsed playing time and total time. Video Shows the title name, recording date, recording mode, etc. ORG: Original PLS: Playlist 01/02/03 Menu Options Selection Method Shows the current title number and total number of titles, and skips to the desired title number. b / B, or 0-9, ENTER 1/1 Shows the current chapter number and total number of chapters, and skips to the desired chapter number.
DVD and Video CD Playback Playing a DVD or Video CD Playback Setup Press the DVD button to set the remote control to operate the DVD deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. 1 Press EJECT to open the disc tray. your disc in the tray with the 2 Load playback side down. EJECT to close the tray.
DVD and Video CD Playback (Continued) Playing a DVD or Video CD (Continued) Still Picture and Frame-by-Frame Playback Video VR VCD ote Frame-by-frame reverse playback is not available on Video CDs. DVD Video VR VCD 1 Press REW (m) or FF (M) during playback. The DVD Recorder+VCR will go into Search mode. 2 Press REW or FF to select the desired speed: MX2, MX4, MX8, MX16, MX100, N (forward) or n, mX2, mX4, mX8, mX16, mX100 (backward).
DVD and Video CD Playback (Continued) Playing a DVD or Video CD (Continued) Time Search DVD Video VR - : -- : -- To Recall a Marked Scene 1 During disc playback, press SEARCH. The Marker Search menu will appear on the TV screen. Marker Search The Time Search function allows you to start playback from any chosen time on the disc. 1 Press DISPLAY during playback. The on-screen display appears on the TV screen. The Time Search box shows the elapsed playing time of the current disc.
DVD and Video CD Playback (Continued) Playing a DVD (Continued) DVD VCD Use the SEARCH button to access virtually any point during Video CD playback. 1/3 If a DVD contains scenes recorded at different camera angles, you can select among these angles during playback. Press ANGLE then press b / B repeatedly during playback to select the desired angle. The number of the current angle appears on the TV screen. ip 1 Press SEARCH during playback. The progress bar appears on the TV screen.
Audio CD and MP3 Operation Playing an Audio CD or MP3 Disc CD MP3 About MP3 The DVD Recorder+VCR can play audio CDs and MP3 files on CD-ROM, CD-R or CD-RW discs. Before playing MP3 files, read “Notes on MP3 Recordings” at right. 1 Insert the disc and close the tray. The AUDIO CD or MP3 CD menu appears on the TV screen.
Audio CD and MP3 Operation (Continued) CD Search MP3 1 Press PAUSE/STEP during playback. 2 To return to playback, press PLAY (N) or press PAUSE/STEP again. Skip Tracks CD MP3 Press PREV (.) or NEXT (>) briefly during playback to go to the next track or to return to the beginning of the current track. Press PREV (.) twice briefly to step back to the previous track. To skip directly to any track during Audio CD playback, enter the track number using the 0-9 buttons.
Program Playback with Audio CD and MP3 Program Playback enables you to make custom playlists of Audio CD or MP3 tracks. Programs can contain up to 99 Audio CD tracks or 256 MP3 tracks. 1 Insert an Audio CD or MP3 disc. v V to select a track on the list then press 2 Use ENTER. The options appear on the left side of the menu. The Audio CD or MP3 CD menu will appear. ote Press and hold V to move quickly to the next track or folder. Press and hold v to move quickly to the previous track or folder.
JPEG Disc Operation JPEG The DVD Recorder+VCR can play discs with JPEG files. Before playing JPEG recordings, read “Notes on JPEG Recordings” at right. 1 Insert a disc and close the tray. The Photo menu appears on the TV screen. Skip Images While viewing a picture, press PREV (.) or NEXT (>) once to advance to the next file or return to the previous file. Rotate Images Use v / V while viewing a picture to flip the picture clockwise or counterclockwise.
VCR Playback Before You Begin Special Playback Features Press the VCR button to set the remote control to operate the VCR deck. Turn the TV on and select the video input source connected to the DVD Recorder+VCR. Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR. Playing a VHS Tape VHS Preparation: Turn on the TV. Tune the TV to the DVD Recorder+VCR output channel (CH 3 or 4) or select the video input connected to the DVD Recorder+VCR.
Recording from TV One Touch Record (OTR) Follow the instructions below to record a TV program. One Touch Recording allows you add recording time in fixed increments at the touch of a button. 1 Turn on the DVD Recorder+VCR and load a recordable disc or tape. Make sure your TV input is set to view the DVD Recorder+VCR. • If you load a blank DVD-RW disc, you will be prompted to set the DISC Record mode.
Basic Recording One Touch Copy - DVD to VHS One Touch Copy - VHS to DVD You can copy the contents of a DVD to a VHS tape using the COPY button. You can copy the contents of a VHS tape to a DVD-R or DVD-RW using the COPY button. This allows you to archive your old VHS tapes to DVD. ote If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs. “Copy-protected. Cannot record.” is displayed on the TV screen.
Timer Recording 1 Press TIMER RECORD. The Timer Record menu appears. Timer Record Media DVD OK Ch. Ch.11 SP 198 min Free Date Start Time End Time Mode 10/16 Thu 10:07 AM 11:00 AM SP TIMER REC Timer Rec List Close • Media – Choose the desired media (DVD or VCR). • Ch. – Choose the desired channel, or one of the external inputs from which to record. • Date – Choose a date up to 1 month in advance, or select a daily or weekly program. • Start Time – Set the recording start time.
Recording from an External Input Recording from External Components You can record from an external component, such as a camcorder or VCR, connected to any of the DVD Recorder+VCR’s external inputs. 1 Make sure the component you want to record from is connected properly to the DVD Recorder+VCR; see page 17. INPUT repeatedly to select the external 2 Press input to record from.
What is DV? DV-Related Messages Using DV, also known as i.LINK, you can connect a DVequipped camcorder to the DVD Recorder+VCR using a single DV cable for input and output of audio, video, data and control signals. The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks. • The DVD Recorder+VCR is only compatible with DVformat (DVC-SD) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.
VR Mode: Original and Playlist Editing In this section, you will learn about editing DVD-RW discs in VR Mode. It is important to understand the difference between edits to the Original content of the disc and edits to the Playlist. Edits you make to the Original content of a disc change the actual content of the disc. For example, if you erase a title or chapter from the Original content, that title or chapter is erased from the disc, freeing up extra recording time.
VR Mode: Original and Playlist Editing (Continued) VR The Original (Title) menu is where you build and edit your Playlist, and where you can erase titles and make other changes to the Original content of the disc. You can also play individual titles directly from the Original (Title) menu. 1 Press DISC MENU/LIST repeatedly to display the Original (Title) menu. • Use the v / V buttons to display the previous/ next page if there are more than 6 titles. • To exit the menu, press RETURN (O).
VR Mode: Original and Playlist Editing (Continued) Using the Playlist (Title) Menu 1 VR Press DISC MENU/LIST repeatedly to display the Playlist (Title) menu. • Use the v / V buttons to display the previous/next page if there are more than 6 titles/chapters. • To exit the menu, press RETURN (O). 1/2 Playlist -Title TITLE 1 10/12 0:25:20 TITLE 2 10/14 Using the Playlist (Chapter) Menu VR DISC MENU/LIST repeatedly to display 1 Press the Playlist (Title) menu.
VR Mode: Original and Playlist Editing (Continued) Making a New Playlist VR You can name Original and Playlist titles independently. Names can be up to 32 characters long. DISC MENU/LIST repeatedly to display 1 Press the Original (Title) or Playlist (Title) menu. Use v V b B to choose the title you want to 2 name then press ENTER. The Original (Title) or Playlist (Title) options appear on the left side of the menu. Play View Chap. Play Rename View Chap.
VR Mode: Original and Playlist Editing (Continued) Erasing an Original or Playlist Title/Chapter VR When you erase a title or chapter from the Playlist menu, you only remove it from the Playlist; the title/chapter remains in the Original menu. If you choose to erase a title or chapter from the Original title/chapter list, the title or chapter is actually erased from the disc and the remaining time available for recording increases. Titles/chapters erased from the Original are also removed from the Playlist.
VR Mode: Original and Playlist Editing (Continued) VR Use this function to combine two adjacent Playlist or Original chapters into one. 1 Press DISC MENU/LIST repeatedly to display the Original (Title) or Playlist (Title) menu. If you want to display the Original (Chapter) or Playlist (Chapter) menu, refer to “Using the Original (Title) menu” and “Using the Playlist (Chapter)” on page 45-46. select the second chapter of the two chap2 First, ters you want to combine then press ENTER.
VR Mode: Original and Playlist Editing (Continued) Deleting a Part VR You can erase a part which you do not want in a title. DISC MENU/LIST repeatedly to display 1 Press the Original (Title) or Playlist (Title) menu. Use v V b B to choose the title you want to 2 delete then press ENTER. The options appear on the left side of the menu. Play View Chap. Play Rename View Chap.
Video Mode: Original Editing In this section, you will learn about editing DVD-R and DVD-RW discs in Video Mode. Press DISC MENU/LIST to display the Title List. Title List 1/3 Title DVD VIDEO 1hour 57min SP Free Before a disc is finalized, you can erase titles recorded on the disc. Video From the Title List display you can play, name and erase titles. Once a Video mode disc is finalized, the Title List screen changes its appearance and all you can do is select titles to play.
Programming the MultiBrand Remote to Control Your TV You can program the DVD Recorder+VCR MultiBrand remote control to operate many TV brands and models. below, find the code(s) correspon1 Indingthetochart your brand of TV. holding down the TV POWER button, 2 While enter the 2-digit code number using the 0-9 buttons. your TV powers off or on, programming is 3 Ifcomplete. If not, repeat step 2 using the next code listed for your brand of TV.
Language Code List Code Language Code Language Code Language Code Language 6566 Abkhazian 7074 Fiji 7678 Lingala 8373 Singhalese 6565 Afar 7073 Finnish 7684 Lithuanian 8375 Slovak 6570 Afrikaans 7082 French 7775 Macedonian 8376 Slovenian 8381 Albanian 7089 Frisian 7771 Malagasy 8379 Somali 6577 Amharic 7176 Galician 7783 Malay 6983 Spanish 6582 Arabic 7565 Georgian 7776 Malayalam 8385 Sudanese 7289 Armenian 6869 German 7784 Maltese 8387 Swahili
Country Code List Use this list to enter the appropriate code number for the “Country Code” setting; see page 23.
Troubleshooting Check the following guide for the possible cause of a problem before contacting customer support. Solution The power cord is disconnected. Plug the power cord into the wall outlet securely. No picture. The TV is not set to receive DVD Recorder+VCR signal output. Select the appropriate video input on the TV so the picture from the DVD Recorder+VCR appears on the TV screen. The video cable is not connected securely. Connect the video cable securely. The TV power is turned off.
Troubleshooting (Continued) Cause Symptom Cannot record or did not record successfully. Timer Recording not possible. Stereo Audio Record and/or Playback not present. Remote control does not work properly. Solution The remaining blank space on the disc is insufficient. Use another disc. The source you are trying to record is copyprotected. You cannot record the source. When setting the recording channel, the channel is tuned on the TV’s own tuner.
Technical Specifications General Operating temperature Operating humidity Signal system AC 120V, 60 Hz 35W 16.9 x 3.25 x 14.2 inches (430 X 83.5 X 360 mm) (w x h x d) 14.9 lbs (6.8 kg) REFERENCE Power requirements Power consumption Dimensions (approx.) Mass (approx.
Technical Specifications (Continued) Outputs VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT (PROGRESSIVE SCAN) Audio output (digital audio) Audio output (optical audio) Audio output (analog audio) RF OUT 1 Vp-p 75 Ω, sync negative, RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1 (C) 0.286 V (p-p) 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2 0.5 V (p-p), 75 Ω, RCA jack x 1 Optical connector x 1 1.
Limited Warranty GoVideo DVD Recorder+VCR Limited Warranty During the warranty period, the GoVideo Warranty Administrator will honor DVD Recorder+VCR service for 90 days labor, 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage. The DVD Recorder+VCR remote control is warranted for 90 days from the date of purchase.
3834RV0002? Printed in Korea
