Product Manual

8
Battery:
Cell Chemistry Li-ion NMC
Pack Capacity Up to 505Wh (10.8V, up to 46.8Ah)
Single Cell Equivalent Capacity Up to 140.4Ah @ 3.6V
Lifecycles 500 Cycles to 80% capacity (Discharge rate: 0.2C,
Full charge/discharge, Temp: 25C)
Shelf-life Charge every 3-6 months
Management System ‘MPPT’ charge controller, low battery protection
Ports:
USB-C PD port (input/output) 5-20V, up to 3.0A (60W max)
USB-C port (output) 5/9V, up to 3.0A (18W max)
USB-A port (output) 5V, up to 2.4A (12W max)
6mm port (output, 6mm) 12V, up to 10A (120W max)
12V car port (output) 12V, up to 10A (120W max), regulated
120V AC Inverter (output, pure sine wave) 120VAC 60Hz, 2.5A (300W, 1200W surge)
230V AC Inverter (output, pure sine wave)
UNIVERSAL OR AUSTRALIA TYPE  AC PLUGS
230VAC 50Hz, 1.3A (300W, 1200W surge)
Charging Port (input, 8mm, blue, circle) 13-22V, up to 10A (120W max)
General:
Chainable No
Weight 12.9 lbs (5.85 kg)
Dimensions 7.5 x 11.25 x 5.8 in (19.05 x 28.58 x 14.73 cm)
Operating usage temp. 32-104 F (0-40 C)
Certs
Warranty 12 months
Having your Goal Zero Yeti connected to a power source, like a solar panel or wall plug, between
adventures or while in storage keeps its battery healthy and topped off. This prolongs battery
life and will ensure your Goal Zero Yeti is charged and ready to go all day, every day.
If you can’t keep your Goal Zero Yeti plugged into a power source during storage,
fully-charge your Goal Zero Yeti every 3 months and store it in a cool, dry place.
Failure to maintain your Goal Zero Yeti by following these steps can result in battery
damage which will void the product warranty.
Storage and Downtime Maintenance