CHARGE ME NOW Before using or storing, plug your Goal Zero Yeti into the wall until it is fully charged. Keep your Goal Zero Yeti plugged in when not in use to ensure it is always ready. This will NOT cause harm to your battery. For more tips and tricks on keeping your battery healthy, see the BATTERIES 101 section.
IMPORTANT SAFETY INSTRUCTIONS Read all instructions and cautions carefully before use to avoid personal injury or damage to the unit and any connected products Observe all Input/Output connectors ratings: To avoid fire or electrical shock hazard, observe all ratings on unit, and products you intend to use; check Table of Contents Getting Started i. Get to Know Your Gear Charging Your Goal Zero Yeti manuals for more information. i.
Get To Know Your Gear Get To Know Your Gear 8mm Input for Charging from Goal Zero Solar Panels, or AC AC Outputs Interactive Buttons and LCD Screen INPUT 12V UNIT LIGHT INFO 60W PD IN/OUT 12V Outputs 8mm input UT INPUT 12V OUTP 12V Output 120V AC 18W QC USB-A 5V, 2.4A 1500W, 3000W SURGE USB-C 5-12V, 3A(18W) USB 5V, up to 2.
How it Works Charging Your Goal Zero Yeti CHARGE ME NOW: Before using or storing, plug your Goal Zero Yeti into the wall until it is fully charged. Keep your Goal Zero Yeti plugged in when not in use to ensure it is always ready. This will NOT cause harm to your battery. For more tips and tricks on keeping your battery healthy, see the BATTERIES 101 section.
Charging from Solar IMPORTANT NOTE: When solar recharging your Goal Zero Yeti, take note of the voltages of the solar panels and do not exceed 50V. Individual solar panels, or solar panels chained in series in excess of 50V cannot be used with the Goal Zero Yeti and can cause serious damage to the unit. For help on chaining solar panels, call our Customer Solutions Center at 888-794-6250.
Cold Weather Usage: Cold temperatures (below freezing) can impact the Goal Zero Yeti’s battery capacity. If power source, whether it’s a solar panel or a wall charger, the Yeti may take a moment to detect and adjust its charge circuitry before it starts drawing power from the source.
Technical Specifications Technical Specifications Charge times: General: Wall Charger (120W) 9 hrs Weight 31.68 lbs (14.37 kg) Car Charger (120W) 9 hrs Dimensions 15.25 x 10.23 x 9.86 in (38.74 x 25.98 x 25.04 cm) Goal Zero Boulder 50 24-48 hrs Operating Usage Temp. 32-104 F (0-40 C) Goal Zero Boulder 100 12-24 hrs Certs Goal Zero Boulder 200 briefcase 6-12 hrs Warranty 24 months Battery: Cell Chemistry Li-ion NMC Pack Capacity 983Wh (10.
Frequently Asked Questions How do I reset my unit? If you are experiencing issues the first step is the try a reset of your unit. To perform a reset, press and hold the info and units buttons at the same time for 5 seconds. You will see the screen flash off and then come back on after a successful reset. See if battery pack at the full state of charge. The battery will charge to 100% and then stop, self-discharge over time to 98% before the charge will engage again.
How do I know if my Goal Zero Yeti is charged? Another factor in the math is how much power is being converted going from the Goal To check the charge level of your Goal Zero Yeti, refer to the Battery Display. When lit up, Zero Yeti battery to the device you are powering/charging. In some situations, like you’ll see a battery outline with 5 segments, indicating the current charge level.
Troubleshooting Education If your devices are not recharging from your Goal Zero Yeti, follow these steps: BATTERIES 101: GOAL ZERO utilizes the latest and greatest in battery technology to 1. Ensure the Output Port has been turned on. The white LED light on the power button accompany you on all life’s adventures. From the versatile and lightweight Lithuim Ion, to should be lit up. the robust and powerful Lead Acid, we’ve compiled some helpful tips to keep your GOAL a.
SOLAR 101: GOAL ZERO makes it easy to recharge your gear from the sun – we didn’t invent solar power, we perfected it. Some things to keep in mind when recharging your gear with solar power: i. Solar panels don’t store power from the sun, they collect it. We teach you to COLLECT – STORE – USE, which is the best way to utilize solar power to recharge your gear. COLLECT the sun’s energy with a solar panel. STORE the power in a recharger. USE the recharger to power your gear, day or night.
EXCLUSIONS This Limited Warranty applies only to hardware products manufactured by or for GOAL ZERO that can be identified by the “GOAL ZERO” trademark, trade name, or logo affixed to them. The Limited Warranty does not apply to any non-GOAL ZERO products, even if packaged or sold with GOAL ZERO products. Non-GOAL ZERO manufacturers, or suppliers may provide their own warranties.
GOAL ZERO HEADQUARTERS 675 West 14600 South Bluffdale, UT 84065 1-888-794-6250 Designed in the U.S.A. Made in China Goal Zero Yeti is a trademark of Goal Zero. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.