User Manual

9 – ASSEMBLING OF THE MODULES
10 – TENSIONER ASSEMBLY
11 – LOWER SIDE FRAME INSTALLATION
12 – LANDING GEAR INSTALLATION
13 – INSTALLATION OF THE MOTOR/ESC
14 – TAIL GROUP ASSEMBLY
15 – TAIL BOOM ASSEMBLY
16 – BATTERY GUIDE ASSEMBLY
1 – INTRODUCTION
2 – IMPORTANT NOTES
3 – NOTE FOR ASSEMBLY
4 – CARBON ROD ASSEMBLY
5 – TRANSMISSION GROUP ASSEMBLY
6 – SWASHPLATE SERVOS ASSEMBLY
7 – FRAME GROUP ASSEMBLY
8 – HEAD ASSEMBLY
INDEX
17 – INSTALLATION FBL/RX
18 – INSTALLATION CANOPY
19 – INSTALLATION BATTERY
20 – IN FLIGHT
21 – MAINTENANCE
22 – TRANSMISSION MODULE
23 – CHECK LIST
24 – SPARE PARTS
http://www.goblin-helicopter.com
Please read this user manual carefully, it contains instructions for the correct assembly of the model.
Please refer to the web site
www.goblin-helicopter.com for updates and other important information.
VERY IMPORTANT
It is extremely important that you take a moment to register your helicopter with us. This is the only way
to ensure that you are properly informed about changes to your kit, such as upgrades, retrofits and other
important developments. SAB Heli Division cannot be held responsible for any issues with your model
and will not provide support unless you register your model.
The Serial number is also engraved in the Aluminum part.
Thank you for your purchase, we hope you enjoy your new Goblin helicopter!
SAB Heli Division
You will find your serial number on the RED plate of the transmission module and on the product card
included with your kit.
Please take a moment to register your kit online via our web site at:
Page 1
INTRODUCTION