User Manual

- 1 x Pinion.
Rear Servo Support
[H1206-S]
- 7 x Uniball M3.
- 1 x Reference Pin.
- 1 x Swashplate Assembly.
Swashplate
[H1204-S]
Damper
[H1216-S]
- 4 x Oring 70
.
- 4 x Oring 90
.
- 2 x Damper A.
- 2 x Damper B.
- 2 x Damper C.
- 1 x Main Gear.
- 1 x Bushing.
- 1 x Shoulder Screw M4x30.
- 1 x Spacer
10x 16x1mm.
- 2 x - Shim
10x 16x0.2mm.
Main Gear
[H1208-S]
Serial Number
[H1212-S]
- 1 x Serial Number.
- 1 x Flat Screw M2.5x5mm.
- 1 x Rear Servo Support.
- 2 x Socket Screws M3x8mm.
Tail Blade Grips
[H1233-S]
- 2 x Tail Blade Grip.
- 4 x Bearing
4x 9x2.5mm.
- 2 x Spacer
7x 9x0.5mm.
- 2 x Thrust Bearing
4x 9x4mm.
- 2 x Socket Screw M3x6mm.
- 2 x Socket Screw M2x6mm.
- 1 x Tail Pitch Slider Assembled.
- 2 x Slider Linkage.
- 2 x Socket Screws M2x6mm.
- 2 x Spacer.
Tail Pitch Slider
[H1249-S]
Battery Carbon SET
[H1247-S]
- 1 x Xross Battery.
- 1 x Carbon Pin Support.
- 1 x Head Cap M2.5x12mm. - 1 x Alu Pin.
- 2 x Head Cap M2.5x8mm. - 1 x Brass lever.
- 5 x Flat Screws M2.5x5mm. - 2 x Washer M2.5.
Pinion
[H1209-S]
- 1 x Main Structure.
- 2 x Pin 3x6.
- 1 x Bearing
10x 22x6mm.
- 1 x Bearing 2RS
10x 22x6mm.
Main Structure
[H1211-S]
- 1 x Front Tail Pulley.
- 1 x Socket Head Cap
Shoulder M3x18mm.
Front Tail Pulley
[H1214-S]
- 1 x Main Pulley.
- 1 x One Way Bearing
10x 14x12.
- 2 x Ball Bearing
10x 15x12.
- 1 x Bushing
10x 13x1.5.
Main Pulley
[H1213-S]
Motor Mount
[H1215-S]
- 1 x Motor Mount.
- 2 x Set Screws M4x15mm.
- 2 x Nylon Nuts M4.
- 2 x Washers
4.3x 11x1.
- 2 x Finishing Washers M2.5.
- 2 x Head Cap Screws M2.5x8mm.
- 2 x Battery Tray Guide.
- 4 x Button Screws M2.5x6mm.
- 2 x Socket Screws M2.5x10mm.
- 2 x Washer
3.2x 6x0.5mm.
Battery Tray Guide
[H1219-S]
35mm Servo Spacer
[H1223-S]
- 1 x 35mm Servo Spacer.
- 1 x CF ESC Plate.
- 1 x Plastic ESC Support.
- 4 x Ny Lon Nut M3.
ESC Support
[H1228-S]
- 2 x Flat Cap Screw M3x8mm.
- 2 x Socket Head Cap M3x10mm.
- 4 x Rubber.
- 4 x Flat Screw M3x5mm.
- 4 x Flat Screw M3x10mm.
- 3 x Socket Screw M3x6mm.
- 1 x FBL Support.
- 1 x FBL Plate.
- 1 x RX Plate.
- 4 x RX Plate.
FBL/RX Support
[H1625-S]
- 2 x Landing Gear Rod.
- 4 x Plug.
Landing Gear Rod
[H1242-S]
Rear Servo Mount 35mm
[H1262-S]
- 1 x Rear Servo Mount 35mm.
- 2 x Finishing Washer M2.5.
- 2 x Socket Screws M2.5x8mm.
- 1 x Front Servo Mount 35mm.
- 3 x Socket Screws M2.5x8mm.
Front Servo Mount 35mm
[H1261-S]
Page 42
SPARE PARTS