User Manual

Tail Pulley 23T
[H1312-23-S]
- 1 x Tail Pulley 23T.
- 1 x Set Screw M3x6mm.
Tail Case Group
[H1306-S]
- 1 x Tail Case Group.
- 4 x Button Screw M3x4mm.
Carbon Rod Support
[H1310-S]
- 1 x Carbon Rod Support.
- 1 x Socket Screw M2.5x12mm.
Tail Shaft
[H1313-S]
- 1 x Tail Shaft.
- 1 x Tail Hub.
- 2 x Oring.
Main Shaft
[H1299-S]
Top Case
[H1503-S]
- 1 x Main Shaft.
- 1 x Shoulder Screw M4x30.
- 1 x Bushing.
- 2 x Shim
10x 16x0.2mm.
- 1 x Main Case.
- 5 x Socket Screws M3x12mm.
- 1 x Bearing
6x 13x5mm.
Frame Spacer
[H1340-S]
- 4 x Frame Spacer.
- 4 x Double Side Tape.
- 1 x Tail Belt Ilder Mount.
- 2 x Socket Screw M3x12mm.
- 2 x Shim
3x 6x0.5mm.
Tail Belt Ilder Mount
[H1341-S]
Base Tail Belt Tensioner
[H1278-S]
- 1 x Bushing.
- 1 x Base Tail Belt Tensioner.
- 1 x Tensioner Column.
- 1 x Tensioner Spring.
- 1 x Shoulder Screw M3x22.
- 2 x Flanged Bearing
3x 7x3.
Bell Crank Base
[H1314-S]
- 1 x Bell Crank Base.
- 1 x Socket Screw M2.5x8mm.
- 2 x Blade Grip Arm.
- 2 x Head Cap Screw M4x8mm.
- 2 x Uniball M3x4 Ø5 H3.5.
Blade Grip Arm 27
[H1342-S]
Front Boom Block
[H1304-S]
- 1 x Front Boom Block.
- 2 x Socket Screws M3x10.
- 1 x Socket Screw M3x12.
- 1 x Nylon Nut M3.
- 1 x Boom Mount Support.
- 4 x Finishing Washer M3.
- 4 x Socket Screws M3x10.
Boom Mount Support
[H1350-S]
- 1 x Tail Servo Mount.
- 2 x Socket Screw M3x12mm.
Tail Servo Mount
[H1353-S]
- 2 x Blade Grip.
- 4 x Bearing
8x 14x4mm.
- 2 x Thrust Bearing
8x 14x4mm.
- 2 x Washer
11x 13.5x0.5mm.
- 2 x Button Screws M4x10mm.
Main Blade Grips
[H1368-S]
- 5 x Block NUT M3.
- 5 x Nylon NUT M3.
Block NUT M3
[H1386-S]
- 1 x Boom Block.
- 2 x Boom Block Rubber.
- 2 x Socket Screws M3x10.
- 1 x Socket Screw M3x12.
- 1 x Nylon Nut M3.
Boom Block
[H1372-S]
- 1 x Nylon Nut M3.
- 1 x Set screws M3x20mm.
- 1 x Shoulder Screw M3x18mm.
- 2 x Socket Screws M4x10mm.
Tail Boom Tension
[H1402-S]
- 1 x Uniball M2.
- 1 x Uniball M3.
- 1 x Bell Crank Lever Assembled.
- 1 x Socket Screws M3x22mm.
- 1 x Socket Screws M2x6mm.
- 1 x Nylon Nut M3.
- 1 x Washer
3.1x 6x0.2mm.
- 1 x Washer
3x 4.5x0.5mm.
Tail Bell Crank Lever
[H1393-S]
- 1 x Clamp 1.
- 1 x Clamp 2.
- 1 x Derlin.
- 1 x Oring.
Plastic Landing Gear
[H1407-S]
- 2 x Plastic Landing Gear.
- 4 x Set Screws M4x4mm.
Alu Landing Gear Mount
[H1408-S]
- 2 x Alu Landing Gear Mount.
- 8 x Socket Screws M2.5x8mm.
UPPER Main Frame
[H1409-S]
- 1 x UPPER Main Frame.
Bearing Support
[H1504-S]
- 1 x Bearing Support.
- 4 x Socket Screws M3x8mm.
- 1 x Bearing
10x 24x7mm.
Page 43
SPARE PARTS