User Manual

[HC582-S]
- 2 x Tail Blades 95mm .
[S95] [S580]
- 1 x Motor Belt GT3-261-13 mm .
- 1 x Brass Bushing.
- 1 x Carbon Rod
2.5x 4x580mm.
- 2 x Plastic Ball Linkage.
- 2 x Main Blades 580mm .
- 8 x Head Cap Screw
Special M4x8mm .
[HC587-S]
- 1 x Alu Bushing.
- 1 x Ball Bearing Ø10xØ24x7mm.
- 1 x Ball Bearing 10 x 22 x 6 mm.
- 1 x Head Cap Shoulder M4x30.
- 1 x Bushing.
- 1 x Shim Ø6xØ9x0.2mm.
[HC586-S]
- 2 x Thread Rod M2.5x40.
- 2 x Aluminum Bush.
[HC588-S]
[HC598-S]
- 1 x Tail Oring SET.
[HC612-S]
- 2 x Rubber Washer.
- 14 x Double side tape.
[HC592-S]
- 1 x Tail Belt 1722mm .
[HC573-S]
- 4 x Rubber Pin .
- 2 x Pin 3x6mm.
- 1 x Ball Bearing 2RSØ10xØ22x6.
- 1 x Ball Bearing Ø6xØ13x5mm.
- 2 x Washer Ø2,5xØ4x0,3mm.
- 2 x Washer Ø4.1xØ6x0.1mm.
- 2 x Spring Washer Ø10xØ15x0.3.
- 2 x Washer Ø8xØ14x0.2mm.
[HC594-S]
- 2 x Spacer Ø7xØ9x0,5mm.
- 2 x Grip Link Bushing.
- 2 x Spacer Ø4xØ6,9x0,5mm.
- 2 x Spacer Ø8xØ12,5x0,5mm.
- 2 x Spacer Ø11xØ13,8x0,5mm.
- 2 x Spacer Arm Ø2,5xØ4x6,3mm.
- 2 x Oring 90
.
- 2 x Spacer Arm Ø2,5xØ4x3mm.
Page 46
SPARE PARTS