User Manual

- 1 x Column Belt Tensioner.
- 1 x Tail Belt Idler.
- 1 x Belt Tensioner Arm.
- 2 x Flanged Bearings
3x 7x3mm.
- 2 x Flanged Bearings
5x 9x3mm.
- 1 x Head Cap Shouldered M3x40mm.
- 1 x Washer
3x 4x0.5mm.
- 1 x Head Cap Screw M3x12mm.
- 2 x Washers
3.2x 6x0.5mm.
- 1 x Button Cap Screw M3x4mm.
- 1 x Spring De8/df0.5/LL8.
Belt Tensioner Support
[H0174-S]
- 1 x 18T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
- 1 x 19T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
19T Pulley
[H0175-19-S]
18T Pulley
[H0175-18-S]
- 1 x 21T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
- 1 x 20T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
20T Pulley
[H0175-20-S]
21T Pulley
[H0175-21-S]
- 1 x 22T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
- 1 x 23T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
22T Pulley
[H0175-22-S]
- 1 x 25T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
25T Pulley
[H0175-25-S]
- 2 x Aluminum Tail Blade Grip.
- 4 x Bearing Ø5xØ10x4mm.
- 2 x Thrust bearing Ø5xØ10x4mm.
- 2 x Button Head Cap M4x8mm.
- 2 x Socket Head Cap M2x6mm.
- 2 x Washer Ø5xØ8.9x0,75mm.
- 2 x Washer Ø7.5xØ10x0,5mm.
Aluminum Front Tail Pulley
[H0172-S]
- 1 x Front Tail Pulley Assembly.
- 1 x Head Cap Screw M2.5x19mm.
- 1 x Metric Hex Nylon Nuts M2,5.
Uniball Radius Arm
[H0205-S]
Plastic Tail Linkage
[H0261-S]
Steel Tail Shaft
[H0325-S]
- 2 x Uniball Radius Arm.
- 2 x Plastic Tail Linkage.
- 2 x Grip Link Bushing.
- 2 x Head Cap Screws M2x6mm.
- 1 x Steel Tail Shaft.
- 1 x Tail Hub.
- 2 x Tail Oring Damperner.
- 1 x Set Screws M4x6mm.
Aluminum Tail Blade Grip
[H0327BM-S]
Tail Spindle
[H0329-S]
- 1 x Tail Spindle.
- 2 x Button Head Cap M4x6mm.
- 1 x Tail Boom Support.
- 1 x Nylon screw M8x20mm.
- 1 x Flat Head Cap ScrewsM3x8.
Tail Boom Support
[H0358-S]
23T Pulley
[H0175-23-S]
24T Pulley
[H0175-24-S]
- 1 x 24T Pulley.
- 1 x Set Screws M4x4mm.
- 1 x Set Screws M4x6mm.
- 1 x Bushing.
- 2 x Blade Grip Arm.
- 2 x Socket Head Cap
Screw M4x10mm.
- 2 x Uniball M3x4 Ø5 H3.5.
Blade Grip Arm
[H0183BM-S]
Aluminum Tail Side Plate
[H0359BM-S]
Aluminum Tail Case Spacer
[H0360BM-S]
- 1 x Aluminum Tail Side Plate.
- 1 x Flanged bearing
Ø6xØ13x5mm.
- 1 x Aluminum Tail Case Spacer.
- 4 x Socket Head Cap M3x8mm.
Page 33
Chapter 17, Spare Parts